[PATCH 4/4] arm: dts: add 8devices Habanero DVK

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



8devices Habanero DVK is a dual-band SoM development kit based on Qualcomm
IPQ4019 + QCA8075 platform.

Specs are:
CPU: QCA IPQ4019
RAM: DDR3L 512MB
Storage: 32MB SPI-NOR and optional Parallel SLC NAND(Some boards ship with it and some without)
WLAN1: 2.4 GHz built into IPQ4019 (802.11n) 2x2
WLAN2: 5 GHz built into IPO4019 (802.11ac Wawe-2) 2x2
Ethernet: 5x Gbit LAN (QCA 8075)
USB: 1x USB 2.0 and 1x USB 3.0 (Both built into IPQ4019)
MicroSD slot (Uses SD controller built into IPQ4019)
SDIO3.0/EMMC slot (Uses the same SD controller)
Mini PCI-E Gen 2.0 slot (Built into IPQ4019)
5x LEDs (4 GPIO controllable)
2x Pushbutton (1 is connected to GPIO, other to SoC reset)
LCD ZIF socket (Uses the LCD controller built into IPQ4019 which has no driver support)
1x UART 115200 rate on J18

2x breakout development headers
12V DC Jack for power
DIP switch for bootstrap configuration

Signed-off-by: Robert Marko <robert.marko@xxxxxxxxxx>
Cc: Luka Perkov <luka.perkov@xxxxxxxxxx>
---
 arch/arm/boot/dts/Makefile                    |   1 +
 .../boot/dts/qcom-ipq4019-habanero-dvk.dts    | 305 ++++++++++++++++++
 2 files changed, 306 insertions(+)
 create mode 100644 arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 246d82fc5fcd..004262e0d699 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -898,6 +898,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-ipq4019-ap.dk04.1-c3.dtb \
 	qcom-ipq4019-ap.dk07.1-c1.dtb \
 	qcom-ipq4019-ap.dk07.1-c2.dtb \
+	qcom-ipq4019-habanero-dvk.dtb \
 	qcom-ipq8064-ap148.dtb \
 	qcom-ipq8064-rb3011.dtb \
 	qcom-msm8660-surf.dtb \
diff --git a/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts b/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
new file mode 100644
index 000000000000..d4236a68fd31
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2019, Robert Marko <robimarko@xxxxxxxxx> */
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	model = "8devices Habanero DVK";
+	compatible = "8dev,habanero-dvk";
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_status: status {
+			label = "habanero-dvk:green:status";
+			gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+
+		led_upgrade: upgrade {
+			label = "habanero-dvk:green:upgrade";
+			gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan2g {
+			label = "habanero-dvk:green:wlan2g";
+			gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		wlan5g {
+			label = "habanero-dvk:green:wlan5g";
+			gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy1tpt";
+		};
+	};
+};
+
+&vqmmc {
+	status = "okay";
+};
+
+&sdhci {
+	status = "okay";
+
+	pinctrl-0 = <&sd_pins>;
+	pinctrl-names = "default";
+	cd-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
+	vqmmc-supply = <&vqmmc>;
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&tlmm {
+	mdio_pins: mdio_pinmux {
+		mux_1 {
+			pins = "gpio6";
+			function = "mdio";
+			bias-pull-up;
+		};
+
+		mux_2 {
+			pins = "gpio7";
+			function = "mdc";
+			bias-pull-up;
+		};
+	};
+
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio16", "gpio17";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	spi_0_pins: spi_0_pinmux {
+		pinmux {
+			function = "blsp_spi0";
+			pins = "gpio13", "gpio14", "gpio15";
+			drive-strength = <12>;
+			bias-disable;
+		};
+
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio12";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	nand_pins: nand_pins {
+		pullups {
+			pins =  "gpio52", "gpio53", "gpio58", "gpio59";
+			function = "qpic";
+			bias-pull-up;
+		};
+
+		pulldowns {
+			pins = "gpio54", "gpio55", "gpio56", "gpio57",
+				"gpio60", "gpio62", "gpio63", "gpio64",
+				"gpio65", "gpio66", "gpio67", "gpio68",
+				"gpio69";
+			function = "qpic";
+			bias-pull-down;
+		};
+	};
+
+	sd_pins: sd_pins {
+		pinmux {
+			function = "sdio";
+			pins = "gpio23", "gpio24", "gpio25", "gpio26",
+				"gpio28", "gpio29", "gpio30", "gpio31";
+			drive-strength = <10>;
+		};
+
+		pinmux_sd_clk {
+			function = "sdio";
+			pins = "gpio27";
+			drive-strength = <16>;
+		};
+
+		pinmux_sd7 {
+			function = "sdio";
+			pins = "gpio32";
+			drive-strength = <10>;
+			bias-disable;
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&prng {
+	status = "okay";
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&blsp1_spi1 {
+	status = "okay";
+
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <24000000>;
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "SBL1";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "MIBIB";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+			partition@60000 {
+				label = "QSEE";
+				reg = <0x00060000 0x00060000>;
+				read-only;
+			};
+			partition@c0000 {
+				label = "CDT";
+				reg = <0x000c0000 0x00010000>;
+				read-only;
+			};
+			partition@d0000 {
+				label = "DDRPARAMS";
+				reg = <0x000d0000 0x00010000>;
+				read-only;
+			};
+			partition@e0000 {
+				label = "APPSBLENV"; /* uboot env */
+				reg = <0x000e0000 0x00010000>;
+				read-only;
+			};
+			partition@f0000 {
+				label = "APPSBL"; /* uboot */
+				reg = <0x000f0000 0x00080000>;
+				read-only;
+			};
+			partition@170000 {
+				label = "ART";
+				reg = <0x00170000 0x00010000>;
+				read-only;
+			};
+			partition@180000 {
+				label = "cfg";
+				reg = <0x00180000 0x00040000>;
+			};
+			partition@1c0000 {
+				label = "firmware";
+				compatible = "denx,fit";
+				reg = <0x001c0000 0x01e40000>;
+			};
+		};
+	};
+};
+
+/* Some DVK boards ship without NAND */
+&nand {
+	status = "okay";
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+};
+
+&blsp1_uart1 {
+	status = "okay";
+
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+};
+
+&pcie0 {
+	status = "okay";
+
+	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
+
+	/* Free slot for use */
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+	};
+};
+
+&wifi0 {
+	status = "okay";
+
+	qcom,ath10k-calibration-variant = "8devices-Habanero";
+};
+
+&wifi1 {
+	status = "okay";
+
+	qcom,ath10k-calibration-variant = "8devices-Habanero";
+};
+
+&usb3_ss_phy {
+	status = "okay";
+};
+
+&usb3_hs_phy {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb2_hs_phy {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
-- 
2.26.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux