Hi Laurentiu, On Mo, 2020-08-31 at 14:24 +0300, Laurentiu Palcu wrote: > Hi Lucas, Sam, > > On Mon, Aug 31, 2020 at 12:37:23PM +0200, Lucas Stach wrote: > > Hi Laurentiu, > > > > On Fr, 2020-08-28 at 11:36 +0300, Laurentiu Palcu wrote: > > > Hi Lucas, > > > > > > I was wondering about the plans to merge this series. Since not many > > > people can test it properly due to lack of DCSS support in the upstream > > > NWL driver (which I heard it's coming soon) and a completely nonexistent > > > HDP driver, are we going to take a leap of faith and merge it as is? Or > > > should we wait? > > > > I think even if the bridges aren't ready yet, the driver is in a good > > enough shape to merge it. There's no point in letting it accumulate > > bitrot while waiting for the bridges to land. Also I guess it will make > > bridge driver development a lot easier when the DCSS driver is in-tree. > > OK, fair enough. > > > > As to who is going to do the actual merge, I know we had a brief > > > discussion about it some time ago and I was supposed to apply for > > > drm-misc rights, however it feels a little awkward to merge my own > > > code... :) Though, I might not even qualify for drm-misc rights anyway, > > > considering I haven't been very active in this area... :/ > > > > Please consider applying for drm-misc merge rights. Even if you don't > > do the initial merge I think it will come in handy in the long run. > > OK, I'll apply for drm-misc rights. Sam also encouraged me to do this in > a previous email. Since this series will be followed by a bunch of other > patches, enabling support for video planes, among other things, I guess > I'll need the rights anyway. > > > > On that note, I will probably need help with the merging, provided it's > > > still happenning. Will you be able to help me out with this? > > > > Sure, I'm having some time available this week. I'll give this v9 > > another spin on my boards and will do the merge after that. > > Thanks Lucas. As a matter of fact, after Sam's email, I was preparing a > v10 after rebasing to latest drm-next. However, no conflicts were encountered > and the v9 series applied cleanly. Let me know if you encounter any > issues and I can resend it. I've tested this together with a hacked up eDP bridge driver stack on my boards. The testing hasn't been really in-depth, but things seem to work fine. I have now pushed the whole series into drm-misc-next. Regards, Lucas > Thanks, > Laurentiu > > > Regards, > > Lucas > > > > > Thanks, > > > laurentiu > > > > > > On Fri, Jul 31, 2020 at 11:18:28AM +0300, Laurentiu Palcu wrote: > > > > From: Laurentiu Palcu <laurentiu.palcu@xxxxxxx> > > > > > > > > Hi, > > > > > > > > This patchset adds initial DCSS support for iMX8MQ chip. Initial support > > > > includes only graphics plane support (no video planes), no HDR10 capabilities, > > > > no graphics decompression (only linear, tiled and super-tiled buffers allowed). > > > > > > > > Support for the rest of the features will be added incrementally, in subsequent > > > > patches. > > > > > > > > The patchset was tested with both HDP driver (in the downstream tree) and the upstream > > > > MIPI-DSI driver (with a couple of patches on top, to make it work correctly with DCSS). > > > > > > > > Thanks, > > > > Laurentiu > > > > > > > > Changes in v9: > > > > * Fixed a compilation issue found by Guido in his setup: 'select > > > > VIDEOMODE_HELPERS' was missing from Kconfig; > > > > * Use imx8mq-clock.h in the bindings file so one can understand what > > > > those clock values mean; > > > > * no other changes done. Couldn't address the hang Guido reported as > > > > it's not happening in my setup. However, in my tree, there are some > > > > extra NWL and ADV patches applied on top of upstream ones... Also, > > > > removing them and testing only with upstream, even if there's no > > > > image out, does not produce a hang... :/ > > > > > > > > Changes in v8: > > > > * Removed 'select RESET_CONTROLLER" from Kconfig as Philipp pointed > > > > out. SRC is not used in DCSS driver; > > > > * Nothing else changed; > > > > > > > > Changes in v7: > > > > * Added a patch to initialize the connector using the drm_bridge_connector > > > > API as Sam suggested. Tested it using NWL_DSI and ADV7535 with > > > > Guido's patch [1] applied and one fix for ADV [2]. Also, some extra > > > > patches for ADV and NWL were needed, from our downstream tree, which > > > > will be upstreamed soon by their author; > > > > * Rest of the patches are untouched; > > > > > > > > [1] https://lists.freedesktop.org/archives/dri-devel/2020-July/273025.html > > > > [2] https://lists.freedesktop.org/archives/dri-devel/2020-July/273132.html > > > > > > > > Changes in v6: > > > > * Addressed Rob's comment and added "additionalProperties: false" at > > > > the end of the bindings' properties. However, this change surfaced > > > > an issue with the assigned-clock* properties not being documented in > > > > the properties section. Added the descriptions and the bindings patch > > > > will need another review; > > > > * Added an entry for DCSS driver in the MAINTAINERS file; > > > > * Removed the component framework patch altogether; > > > > > > > > Changes in v5: > > > > * Rebased to latest; > > > > * Took out component framework support and made it a separate patch so > > > > that people can still test with HDP driver, which makes use of it. > > > > But the idea is to get rid of it once HDP driver's next versions > > > > will remove component framework as well; > > > > * Slight improvement to modesetting: avoid cutting off the pixel clock > > > > if the new mode and the old one are equal. Also, in this case, is > > > > not necessary to wait for DTG to shut off. This would allow to switch > > > > from 8b RGB to 12b YUV422, for example, with no interruptions (at least > > > > from DCSS point of view); > > > > * Do not fire off CTXLD when going to suspend, unless it still has > > > > entries that need to be committed to DCSS; > > > > * Addressed Rob's comments on bindings; > > > > > > > > Changes in v4: > > > > * Addressed Lucas and Philipp's comments: > > > > * Added DRM_KMS_CMA_HELPER dependency in Kconfig; > > > > * Removed usage of devm_ functions since I'm already doing all the > > > > clean-up in the submodules_deinit(); > > > > * Moved the drm_crtc_arm_vblank_event() in dcss_crtc_atomic_flush(); > > > > * Removed en_completion variable from dcss_crtc since this was > > > > introduced mainly to avoid vblank timeout warnings which were fixed > > > > by arming the vblank event in flush() instead of begin(); > > > > * Removed clks_on and irq_enabled flags since all the calls to > > > > enabling/disabling clocks and interrupts were balanced; > > > > * Removed the custom atomic_commit callback and used the DRM core > > > > helper and, in the process, got rid of a workqueue that wasn't > > > > necessary anymore; > > > > * Fixed some minor DT binding issues flagged by Philipp; > > > > * Some other minor changes suggested by Lucas; > > > > * Removed YUV formats from the supported formats as these cannot work > > > > without the HDR10 module CSCs and LUTs. Will add them back when I > > > > will add support for video planes; > > > > > > > > Changes in v3: > > > > * rebased to latest linux-next and made it compile as drmP.h was > > > > removed; > > > > * removed the patch adding the VIDEO2_PLL clock. It's already applied; > > > > * removed an unnecessary 50ms sleep in the dcss_dtg_sync_set(); > > > > * fixed a a spurious hang reported by Lukas Hartmann and encountered > > > > by me several times; > > > > * mask DPR and DTG interrupts by default, as they may come enabled from > > > > U-boot; > > > > > > > > Changes in v2: > > > > * Removed '0x' in node's unit-address both in DT and yaml; > > > > * Made the address region size lowercase, to be consistent; > > > > * Removed some left-over references to P010; > > > > * Added a Kconfig dependency of DRM && ARCH_MXC. This will also silence compilation > > > > issues reported by kbuild for other architectures; > > > > > > > > > > > > Laurentiu Palcu (5): > > > > drm/imx: compile imx directory by default > > > > drm/imx: Add initial support for DCSS on iMX8MQ > > > > drm/imx/dcss: use drm_bridge_connector API > > > > MAINTAINERS: Add entry for i.MX 8MQ DCSS driver > > > > dt-bindings: display: imx: add bindings for DCSS > > > > > > > > .../bindings/display/imx/nxp,imx8mq-dcss.yaml | 108 +++ > > > > MAINTAINERS | 8 + > > > > drivers/gpu/drm/Makefile | 2 +- > > > > drivers/gpu/drm/imx/Kconfig | 2 + > > > > drivers/gpu/drm/imx/Makefile | 1 + > > > > drivers/gpu/drm/imx/dcss/Kconfig | 9 + > > > > drivers/gpu/drm/imx/dcss/Makefile | 6 + > > > > drivers/gpu/drm/imx/dcss/dcss-blkctl.c | 70 ++ > > > > drivers/gpu/drm/imx/dcss/dcss-crtc.c | 219 +++++ > > > > drivers/gpu/drm/imx/dcss/dcss-ctxld.c | 424 +++++++++ > > > > drivers/gpu/drm/imx/dcss/dcss-dev.c | 325 +++++++ > > > > drivers/gpu/drm/imx/dcss/dcss-dev.h | 177 ++++ > > > > drivers/gpu/drm/imx/dcss/dcss-dpr.c | 562 ++++++++++++ > > > > drivers/gpu/drm/imx/dcss/dcss-drv.c | 138 +++ > > > > drivers/gpu/drm/imx/dcss/dcss-dtg.c | 409 +++++++++ > > > > drivers/gpu/drm/imx/dcss/dcss-kms.c | 198 +++++ > > > > drivers/gpu/drm/imx/dcss/dcss-kms.h | 44 + > > > > drivers/gpu/drm/imx/dcss/dcss-plane.c | 405 +++++++++ > > > > drivers/gpu/drm/imx/dcss/dcss-scaler.c | 826 ++++++++++++++++++ > > > > drivers/gpu/drm/imx/dcss/dcss-ss.c | 180 ++++ > > > > 20 files changed, 4112 insertions(+), 1 deletion(-) > > > > create mode 100644 Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml > > > > create mode 100644 drivers/gpu/drm/imx/dcss/Kconfig > > > > create mode 100644 drivers/gpu/drm/imx/dcss/Makefile > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-blkctl.c > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-crtc.c > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ctxld.c > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.c > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.h > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dpr.c > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-drv.c > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dtg.c > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.c > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.h > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-plane.c > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-scaler.c > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ss.c > > > > > > > > -- > > > > 2.23.0 > > > >
