To support XUSB host controller ELPG, this commit moves VBUS control .phy_power_on()/.phy_power_off() to .phy_init()/.phy_exit(). When XUSB host controller enters ELPG, host driver invokes .phy_power_off(), VBUS should remain ON so that USB devices will not disconnect. VBUS can be turned OFF when host driver invokes .phy_exit() which indicates disabling a USB port. Signed-off-by: JC Kuo <jckuo@xxxxxxxxxx> --- v3: new, was a part of "phy: tegra: xusb: Add wake/sleepwalk for Tegra210" drivers/phy/tegra/xusb-tegra210.c | 52 ++++++++++++++++++++++++------- 1 file changed, 40 insertions(+), 12 deletions(-) diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c index 36949039e529..0cc6b6fd8474 100644 --- a/drivers/phy/tegra/xusb-tegra210.c +++ b/drivers/phy/tegra/xusb-tegra210.c @@ -1834,8 +1834,25 @@ static int tegra210_usb2_phy_init(struct phy *phy) { struct tegra_xusb_lane *lane = phy_get_drvdata(phy); struct tegra_xusb_padctl *padctl = lane->pad->padctl; + unsigned int index = lane->index; + struct tegra_xusb_usb2_port *port; + int err; u32 value; + port = tegra_xusb_find_usb2_port(padctl, index); + if (!port) { + dev_err(&phy->dev, "no port found for USB2 lane %u\n", index); + return -ENODEV; + } + + if (port->supply && port->mode == USB_DR_MODE_HOST) { + err = regulator_enable(port->supply); + if (err) + return err; + } + + mutex_lock(&padctl->lock); + value = padctl_readl(padctl, XUSB_PADCTL_USB2_PAD_MUX); value &= ~(XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_MASK << XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_SHIFT); @@ -1843,11 +1860,30 @@ static int tegra210_usb2_phy_init(struct phy *phy) XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_SHIFT; padctl_writel(padctl, value, XUSB_PADCTL_USB2_PAD_MUX); + mutex_unlock(&padctl->lock); + return 0; } static int tegra210_usb2_phy_exit(struct phy *phy) { + struct tegra_xusb_lane *lane = phy_get_drvdata(phy); + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + struct tegra_xusb_usb2_port *port; + int err; + + port = tegra_xusb_find_usb2_port(padctl, lane->index); + if (!port) { + dev_err(&phy->dev, "no port found for USB2 lane %u\n", lane->index); + return -ENODEV; + } + + if (port->supply && port->mode == USB_DR_MODE_HOST) { + err = regulator_disable(port->supply); + if (err) + return err; + } + return 0; } @@ -1968,6 +2004,8 @@ static int tegra210_usb2_phy_power_on(struct phy *phy) priv = to_tegra210_xusb_padctl(padctl); + mutex_lock(&padctl->lock); + if (port->usb3_port_fake != -1) { value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP); value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK( @@ -2061,14 +2099,6 @@ static int tegra210_usb2_phy_power_on(struct phy *phy) padctl_writel(padctl, value, XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index)); - if (port->supply && port->mode == USB_DR_MODE_HOST) { - err = regulator_enable(port->supply); - if (err) - return err; - } - - mutex_lock(&padctl->lock); - if (pad->enable > 0) { pad->enable++; mutex_unlock(&padctl->lock); @@ -2077,7 +2107,7 @@ static int tegra210_usb2_phy_power_on(struct phy *phy) err = clk_prepare_enable(pad->clk); if (err) - goto disable_regulator; + goto out; value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1); value &= ~((XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_MASK << @@ -2109,8 +2139,7 @@ static int tegra210_usb2_phy_power_on(struct phy *phy) return 0; -disable_regulator: - regulator_disable(port->supply); +out: mutex_unlock(&padctl->lock); return err; } @@ -2169,7 +2198,6 @@ static int tegra210_usb2_phy_power_off(struct phy *phy) padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0); out: - regulator_disable(port->supply); mutex_unlock(&padctl->lock); return 0; } -- 2.25.1