Hi All, arm64: dts: ti: k3-j7200: add dma and mcu cpsw nodes This series adds DT nodes for TI J7200 SoC - INTR/INTA, Ringacc and UDMA nodes for Main and MCU NAVSS, which are compatible with J721E Soc, to enable DMA support - MCU CPSW2g DT nodes to enable networking This series depends on: - [PATCH v2 0/4] arm64: Initial support for Texas Instrument's J7200 Platform [1] from: Lokesh Vutla <lokeshvutla@xxxxxx> - [PATCH] soc: ti: k3-socinfo: Add entry for J7200 [2] from: Peter Ujfalusi <peter.ujfalusi@xxxxxx> - [PATCH] dmaengine: ti: k3-udma: Use soc_device_match() for SoC dependent parameters [3] from: Peter Ujfalusi <peter.ujfalusi@xxxxxx> [1] https://lore.kernel.org/linux-arm-kernel/20200827065144.17683-1-lokeshvutla@xxxxxx/T/#m141ae4d0dd818518c00c81806d689983d6e832e6 [2] https://lore.kernel.org/patchwork/patch/1283230/ [3] https://lore.kernel.org/lkml/20200904120009.30941-1-peter.ujfalusi@xxxxxx/ Changes in v2: - fixed DT build warnings (Nishanth Menon) v1: https://lore.kernel.org/patchwork/cover/1301067/ Grygorii Strashko (3): arm64: dts: ti: k3-j7200-main: add main navss cpts node arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux and phy defs Peter Ujfalusi (1): arm64: dts: ti: k3-j7200: add DMA support .../dts/ti/k3-j7200-common-proc-board.dts | 45 +++++++ arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 73 +++++++++++ .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 118 ++++++++++++++++++ 3 files changed, 236 insertions(+) -- 2.17.1
