To allow lesser dependency and better maintainability use CONFIG_ARCH_K3 for building dtbs for all K3 based devices. This is as per the discussion in [0]. [0] https://lore.kernel.org/linux-arm-kernel/20200908112534.t5bgrjf7y3a6l2ss@akan/ Signed-off-by: Lokesh Vutla <lokeshvutla@xxxxxx> --- arch/arm64/boot/dts/ti/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 05c0bebf65d4..e7bfb16fa816 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -6,6 +6,6 @@ # Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ # -dtb-$(CONFIG_ARCH_K3_AM6_SOC) += k3-am654-base-board.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb -dtb-$(CONFIG_ARCH_K3_J721E_SOC) += k3-j721e-common-proc-board.dtb +dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board.dtb -- 2.28.0
