Now that the switch ports have a label in the .dtsi, simplify the whole
"switch0" block for the v7 dts files.
Signed-off-by: Andre Heider <a.heider@xxxxxxxxx>
---
This goes on top of Pali's patch:
"arm64: dts: marvell: espressobin: Add ethernet switch aliases"
The resulting .dtb files are the same.
.../armada-3720-espressobin-v7-emmc.dts | 18 +++++-------------
.../dts/marvell/armada-3720-espressobin-v7.dts | 18 +++++-------------
2 files changed, 10 insertions(+), 26 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
index 215d2f702623..61d49d6a2a2a 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
@@ -28,20 +28,12 @@ aliases {
};
};
-&switch0 {
- ports {
- switch0port1: port@1 {
- reg = <1>;
- label = "lan1";
- phy-handle = <&switch0phy0>;
- };
+&switch0port1 {
+ label = "lan1";
+};
- switch0port3: port@3 {
- reg = <3>;
- label = "wan";
- phy-handle = <&switch0phy2>;
- };
- };
+&switch0port3 {
+ label = "wan";
};
/* U11 */
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
index b6f4af8ebafb..44dbe9a21cc7 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
@@ -27,18 +27,10 @@ aliases {
};
};
-&switch0 {
- ports {
- switch0port1: port@1 {
- reg = <1>;
- label = "lan1";
- phy-handle = <&switch0phy0>;
- };
+&switch0port1 {
+ label = "lan1";
+};
- switch0port3: port@3 {
- reg = <3>;
- label = "wan";
- phy-handle = <&switch0phy2>;
- };
- };
+&switch0port3 {
+ label = "wan";
};
--
2.28.0
