The fixed clocks are kept under dedicated 'clocks' node but this causes multiple dtschema warnings: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' clocks: #size-cells:0:0: 0 is not one of [1, 2] clocks: oscillator@0:reg:0: [0] is too short clocks: oscillator@1:reg:0: [1] is too short clocks: 'ranges' is a required property oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx> --- arch/arm/boot/dts/s3c6410-smdk6410.dts | 30 ++++++++++---------------- 1 file changed, 11 insertions(+), 19 deletions(-) diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts index 96267f5f02a8..74379061a11a 100644 --- a/arch/arm/boot/dts/s3c6410-smdk6410.dts +++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts @@ -28,26 +28,18 @@ bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1"; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - fin_pll: oscillator@0 { - compatible = "fixed-clock"; - reg = <0>; - clock-frequency = <12000000>; - clock-output-names = "fin_pll"; - #clock-cells = <0>; - }; + fin_pll: oscillator-0 { + compatible = "fixed-clock"; + clock-frequency = <12000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; - xusbxti: oscillator@1 { - compatible = "fixed-clock"; - reg = <1>; - clock-output-names = "xusbxti"; - clock-frequency = <48000000>; - #clock-cells = <0>; - }; + xusbxti: oscillator-1 { + compatible = "fixed-clock"; + clock-output-names = "xusbxti"; + clock-frequency = <48000000>; + #clock-cells = <0>; }; srom-cs1@18000000 { -- 2.17.1