Make trickle-resistor-ohms optional for charging setups that do not
require specifying ROUT bits (specifying the resistor value between Vcc
and Vbackup). In order to allow specifying that, introduce
requires_trickle_resistor per chip.
Signed-off-by: Bastian Krause <bst@xxxxxxxxxxxxxx>
---
No previous version.
---
drivers/rtc/rtc-ds1307.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index ff5242d10b21..7983438b677a 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -190,6 +190,10 @@ struct chip_desc {
u16 trickle_charger_reg;
u8 (*do_trickle_setup)(struct ds1307 *, u32,
bool);
+ /* Does the RTC require trickle-resistor-ohms to select the value of
+ * the resistor between Vcc and Vbackup?
+ */
+ bool requires_trickle_resistor;
};
static const struct chip_desc chips[last_ds_type];
@@ -981,6 +985,7 @@ static const struct chip_desc chips[last_ds_type] = {
.bbsqi_bit = DS1339_BIT_BBSQI,
.trickle_charger_reg = 0x10,
.do_trickle_setup = &do_trickle_setup_ds1339,
+ .requires_trickle_resistor = true,
},
[ds_1340] = {
.century_reg = DS1307_REG_HOUR,
@@ -988,6 +993,7 @@ static const struct chip_desc chips[last_ds_type] = {
.century_bit = DS1340_BIT_CENTURY,
.do_trickle_setup = &do_trickle_setup_ds1339,
.trickle_charger_reg = 0x08,
+ .requires_trickle_resistor = true,
},
[ds_1341] = {
.century_reg = DS1307_REG_MONTH,
@@ -1302,7 +1308,7 @@ static u8 ds1307_trickle_init(struct ds1307 *ds1307,
return 0;
if (device_property_read_u32(ds1307->dev, "trickle-resistor-ohms",
- &ohms))
+ &ohms) && chip->requires_trickle_resistor)
return 0;
if (device_property_read_bool(ds1307->dev, "trickle-diode-disable"))
--
2.28.0
