Hi Neil. On Mon, Sep 07, 2020 at 01:10:26PM +0200, Neil Armstrong wrote: > This add the bindings for the 1024*600 tl070wsh30 DSI panel. The binding looks like a panel-simple-dsi.yaml candidate. Only differen is enable-gpios versus reset-gpios Could you check if we can use panel-simple-dsi-yaml. Sam > > Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> > --- > .../display/panel/tdo,tl070wsh30.yaml | 58 +++++++++++++++++++ > 1 file changed, 58 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/tdo,tl070wsh30.yaml > > diff --git a/Documentation/devicetree/bindings/display/panel/tdo,tl070wsh30.yaml b/Documentation/devicetree/bindings/display/panel/tdo,tl070wsh30.yaml > new file mode 100644 > index 000000000000..20f4fdedfcb0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/tdo,tl070wsh30.yaml > @@ -0,0 +1,58 @@ > +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) > +# Copyright 2020 BayLibre, SAS > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/panel/tdo,tl070wsh30.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: TDO TL070WSH30 DSI panel > + > +maintainers: > + - Neil Armstrong <narmstrong@xxxxxxxxxxxx> > + > +allOf: > + - $ref: panel-common.yaml# > + > +properties: > + > + compatible: > + enum: > + - tdo,tl070wsh30 > + > + reg: > + maxItems: 1 > + description: DSI virtual channel > + > + backlight: true > + reset-gpios: true > + port: true > + power-supply: true > + > +additionalProperties: false > + > +required: > + - compatible > + - power-supply > + - reset-gpios > + - port > + - reg > + > +examples: > + - | > + dsi { > + #address-cells = <1>; > + #size-cells = <0>; > + panel@0 { > + compatible = "tdo,tl070wsh30"; > + reg = <0>; > + power-supply = <&vcc_lcd_reg>; > + backlight = <&panel_backlight>; > + reset-gpios = <&gpio_reset>; > + > + port { > + panel: endpoint { > + remote-endpoint = <&mipi_dsi_out>; > + }; > + }; > + }; > + }; > -- > 2.22.0
