If the iova is over 32bit, the fault status register bit is a little different. Add a flag for the special register bits. Signed-off-by: Yong Wu <yong.wu@xxxxxxxxxxxx> --- drivers/iommu/mtk_iommu.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c index 9fe9a706742c..4da92e5739f3 100644 --- a/drivers/iommu/mtk_iommu.c +++ b/drivers/iommu/mtk_iommu.c @@ -4,6 +4,7 @@ * Author: Yong Wu <yong.wu@xxxxxxxxxxxx> */ #include <linux/memblock.h> +#include <linux/bitfield.h> #include <linux/bug.h> #include <linux/clk.h> #include <linux/component.h> @@ -87,6 +88,9 @@ #define F_REG_MMU1_FAULT_MASK GENMASK(13, 7) #define REG_MMU0_FAULT_VA 0x13c +#define F_MMU_INVAL_VA_31_12_MASK GENMASK(31, 12) +#define F_MMU_INVAL_VA_34_32_MASK GENMASK(11, 9) +#define F_MMU_INVAL_PA_34_32_MASK GENMASK(8, 6) #define F_MMU_FAULT_VA_WRITE_BIT BIT(1) #define F_MMU_FAULT_VA_LAYER_BIT BIT(0) @@ -110,6 +114,7 @@ #define OUT_ORDER_WR_EN BIT(4) #define HAS_SUB_COMM BIT(5) #define WR_THROT_EN BIT(6) +#define IOVA_34_EN BIT(7) #define MTK_IOMMU_HAS_FLAG(pdata, _x) \ ((((pdata)->flags) & (_x)) == (_x)) @@ -258,8 +263,9 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id) { struct mtk_iommu_data *data = dev_id; struct mtk_iommu_domain *dom = data->m4u_dom; - u32 int_state, regval, fault_iova, fault_pa; unsigned int fault_larb, fault_port, sub_comm = 0; + u32 int_state, regval, va34_32, pa34_32; + u64 fault_iova, fault_pa; bool layer, write; /* Read error info from registers */ @@ -275,6 +281,14 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id) } layer = fault_iova & F_MMU_FAULT_VA_LAYER_BIT; write = fault_iova & F_MMU_FAULT_VA_WRITE_BIT; + if (MTK_IOMMU_HAS_FLAG(data->plat_data, IOVA_34_EN)) { + va34_32 = FIELD_GET(F_MMU_INVAL_VA_34_32_MASK, fault_iova); + pa34_32 = FIELD_GET(F_MMU_INVAL_PA_34_32_MASK, fault_iova); + fault_iova = fault_iova & F_MMU_INVAL_VA_31_12_MASK; + fault_iova |= (u64)va34_32 << 32; + fault_pa |= (u64)pa34_32 << 32; + } + fault_port = F_MMU_INT_ID_PORT_ID(regval); if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_SUB_COMM)) { fault_larb = F_MMU_INT_ID_COMM_ID(regval); @@ -288,7 +302,7 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id) write ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ)) { dev_err_ratelimited( data->dev, - "fault type=0x%x iova=0x%x pa=0x%x larb=%d port=%d layer=%d %s\n", + "fault type=0x%x iova=0x%llx pa=0x%llx larb=%d port=%d layer=%d %s\n", int_state, fault_iova, fault_pa, fault_larb, fault_port, layer, write ? "write" : "read"); } -- 2.18.0