In the latest SoC, there are several HW IP require a sepecial iova range, mainly CCU and VPU has this requirement. Take CCU as a example, CCU require its iova locate in the range(0x4000_0000 ~ 0x43ff_ffff). In this patch we add a domain definition for the special port. In the example of CCU, If we preassign CCU port in domain1, then iommu driver will prepare a independent iommu domain of the special iova range for it, then the iova got from dma_alloc_attrs(ccu-dev) will locate in its special range. This is a preparing patch for multi-domain support. Signed-off-by: Yong Wu <yong.wu@xxxxxxxxxxxx> --- include/dt-bindings/memory/mtk-smi-larb-port.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/include/dt-bindings/memory/mtk-smi-larb-port.h b/include/dt-bindings/memory/mtk-smi-larb-port.h index f4d8e3aed0bc..d00f5de8438b 100644 --- a/include/dt-bindings/memory/mtk-smi-larb-port.h +++ b/include/dt-bindings/memory/mtk-smi-larb-port.h @@ -7,9 +7,16 @@ #define __DTS_MTK_IOMMU_PORT_H_ #define MTK_LARB_NR_MAX 32 +#define MTK_M4U_DOM_NR_MAX 8 + +#define MTK_M4U_DOM_ID(domid, larb, port) \ + (((domid) & 0x7) << 16 | (((larb) & 0x1f) << 5) | ((port) & 0x1f)) + +/* The default dom id is 0. */ +#define MTK_M4U_ID(larb, port) MTK_M4U_DOM_ID(0, larb, port) -#define MTK_M4U_ID(larb, port) (((larb) << 5) | (port)) #define MTK_M4U_TO_LARB(id) (((id) >> 5) & 0x1f) #define MTK_M4U_TO_PORT(id) ((id) & 0x1f) +#define MTK_M4U_TO_DOM(id) (((id) >> 16) & 0x7) #endif -- 2.18.0
