Re: [PATCH v4 2/3] dt-bindings: media: ov772x: Make bus-type mandatory

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jacopo,

On Fri, Sep 04, 2020 at 10:05:35AM +0200, Jacopo Mondi wrote:
> On Thu, Sep 03, 2020 at 03:10:28PM +0200, Jacopo Mondi wrote:
> > In order to establish required properties based on the selected
> > bus type, make the 'bus-type' property mandatory. As this change
> > documents an endpoint property, also document the 'remote-endpoint'
> > one now that the 'endpoint' schema has been expanded.
> >
> > Binary compatibility with existing DTB is kept as the driver does not
> > enforce the property to be present, and shall fall-back to default
> > parallel bus configuration, which was the only supported bus type, if
> > the property is not specified.
> >
> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > ---
> >  .../bindings/media/i2c/ovti,ov772x.yaml       | 20 +++++++++++++++++++
> >  1 file changed, 20 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
> > index e7e2d31fcc23..406e9cd463a2 100644
> > --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
> > +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
> > @@ -41,6 +41,25 @@ properties:
> >      description: |
> >        Video output port. See ../video-interfaces.txt.
> >
> > +    properties:
> > +      endpoint:
> > +        type: object
> > +
> > +        properties:
> > +          remote-endpoint:
> > +            description: See ../video-interfaces.txt
> 
> So I guess the same as you suggested for imx214 applies here (drop
> remote-endpoint)

Correct. And you should then replace additionalProperties: false with
unevaluatedProperties: false.

> > +
> > +          bus-type:
> > +            enum: [5, 6]
> > +
> > +        required:
> > +          - remote-endpoint
> > +          - bus-type
> > +
> > +        additionalProperties: false
> > +
> > +    additionalProperties: false
> > +
> >  required:
> >    - compatible
> >    - reg
> > @@ -65,6 +84,7 @@ examples:
> >
> >              port {
> >                  ov772x_0: endpoint {
> > +                    bus-type = <5>;
> >                      remote-endpoint = <&vcap1_in0>;
> >                  };
> >              };

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux