This RFC adds what seems to be needed for USB to work with Hikey 970.
While this driver works fine on Kernel 4.9 and 4.19, there's a hack there,
in the form of some special binding logic under dwg3 driver, that seems to
be just adding some delay, and doing some different initializations at
PM (basically, disabling autosuspend).
With upstream Kernel, however, I'm getting a hard to track
Kernel panic:
[ 1.837458] SError Interrupt on CPU0, code 0xbf000002 -- SError
[ 1.837462] CPU: 0 PID: 74 Comm: kworker/0:1 Not tainted 5.8.0+ #205
[ 1.837463] Hardware name: HiKey970 (DT)
[ 1.837465] Workqueue: events deferred_probe_work_func
[ 1.837467] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--)
[ 1.837468] pc : _raw_spin_unlock_irqrestore+0x18/0x50
[ 1.837469] lr : regmap_unlock_spinlock+0x14/0x20
[ 1.837470] sp : ffff8000124dba60
[ 1.837471] x29: ffff8000124dba60 x28: 0000000000000000
[ 1.837474] x27: ffff0001b7e854c8 x26: ffff80001204ea18
[ 1.837476] x25: 0000000000000005 x24: ffff800011f918f8
[ 1.837479] x23: ffff800011fbb588 x22: ffff0001b7e40e00
[ 1.837481] x21: 0000000000000100 x20: 0000000000000000
[ 1.837483] x19: ffff0001b767ec00 x18: 00000000ff10c000
[ 1.837485] x17: 0000000000000002 x16: 0000b0740fdb9950
[ 1.837488] x15: ffff8000116c1198 x14: ffffffffffffffff
[ 1.837490] x13: 0000000000000030 x12: 0101010101010101
[ 1.837493] x11: 0000000000000020 x10: ffff0001bf17d130
[ 1.837495] x9 : 0000000000000000 x8 : ffff0001b6938080
[ 1.837497] x7 : 0000000000000000 x6 : 000000000000003f
[ 1.837500] x5 : 0000000000000000 x4 : 0000000000000000
[ 1.837502] x3 : ffff80001096a880 x2 : 0000000000000000
[ 1.837505] x1 : ffff0001b7e40e00 x0 : 0000000100000001
[ 1.837507] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 1.837509] CPU: 0 PID: 74 Comm: kworker/0:1 Not tainted 5.8.0+ #205
[ 1.837510] Hardware name: HiKey970 (DT)
[ 1.837511] Workqueue: events deferred_probe_work_func
[ 1.837513] Call trace:
[ 1.837514] dump_backtrace+0x0/0x1e0
[ 1.837515] show_stack+0x18/0x24
[ 1.837516] dump_stack+0xc0/0x11c
[ 1.837517] panic+0x15c/0x324
[ 1.837518] nmi_panic+0x8c/0x90
[ 1.837519] arm64_serror_panic+0x78/0x84
[ 1.837520] do_serror+0x158/0x15c
[ 1.837521] el1_error+0x84/0x100
[ 1.837522] _raw_spin_unlock_irqrestore+0x18/0x50
[ 1.837523] regmap_write+0x58/0x80
[ 1.837524] hi3660_reset_deassert+0x28/0x34
[ 1.837526] reset_control_deassert+0x50/0x260
[ 1.837527] reset_control_deassert+0xf4/0x260
[ 1.837528] dwc3_probe+0x5dc/0xe6c
[ 1.837529] platform_drv_probe+0x54/0xb0
[ 1.837530] really_probe+0xe0/0x490
[ 1.837531] driver_probe_device+0xf4/0x160
[ 1.837532] __device_attach_driver+0x8c/0x114
[ 1.837533] bus_for_each_drv+0x78/0xcc
[ 1.837534] __device_attach+0x108/0x1a0
[ 1.837535] device_initial_probe+0x14/0x20
[ 1.837537] bus_probe_device+0x98/0xa0
[ 1.837538] deferred_probe_work_func+0x88/0xe0
[ 1.837539] process_one_work+0x1cc/0x350
[ 1.837540] worker_thread+0x2c0/0x470
[ 1.837541] kthread+0x154/0x160
[ 1.837542] ret_from_fork+0x10/0x30
[ 1.837569] SMP: stopping secondary CPUs
[ 1.837570] Kernel Offset: 0x1d0000 from 0xffff800010000000
[ 1.837571] PHYS_OFFSET: 0x0
[ 1.837572] CPU features: 0x240002,20882004
[ 1.837573] Memory Limit: none
I suspect that the driver works downstream because of the extra
delay of probing an additional driver, as porting such driver
to upstream sometimes makes this driver to work. So, it could
be due to some race condition.
The problem could also be due to something wrong at DT,
as, with the additional driver, the DT bindings are different.
As I'm not familiar about the Serror error mechanism on ARM,
I'm wondering if someone could give me some hint about how
can I identify what's happening here. Due to the panic(), I
can't check what wrong happened there. Not sure if it would
be safe to just hack the error handling part of Serror, in order
to let the boot to finish.
PS.: the driver/misc hisi_hikey_usb driver on this series came
from the John Stultz Hikey 960 tree.
Thanks!
Mauro
Mauro Carvalho Chehab (7):
phy: hisilicon: phy-hi3670-usb3: use a consistent namespace
phy: hisilicon: phy-hi3670-usb3: fix coding style
phy: hisilicon: phy-hi3670-usb3: change some DT properties
dt-bindings: phy: convert phy-kirin970-usb3.txt to yaml
MAINTAINERS: add myself as maintainer for Kirin 970 USB PHY
misc: hisi_hikey_usb: add support for Hikey 970
dts: hisilicon: add support for USB3 on Hikey 970
Yu Chen (3):
phy: hisilicon: add USB physical layer for Kirin 3670
phy: hisilicon: phy-hi3670-usb3: fix some issues at the init code
misc: hisi_hikey_usb: Driver to support onboard USB gpio hub on
Hikey960
.../bindings/phy/hisilicon,hi3670-usb3.yaml | 72 ++
MAINTAINERS | 16 +-
.../boot/dts/hisilicon/hi3670-hikey970.dts | 103 +++
arch/arm64/boot/dts/hisilicon/hi3670.dtsi | 49 ++
drivers/misc/Kconfig | 9 +
drivers/misc/Makefile | 1 +
drivers/misc/hisi_hikey_usb.c | 272 +++++++
drivers/phy/hisilicon/Kconfig | 10 +
drivers/phy/hisilicon/Makefile | 1 +
drivers/phy/hisilicon/phy-hi3670-usb3.c | 671 ++++++++++++++++++
10 files changed, 1203 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
create mode 100644 drivers/misc/hisi_hikey_usb.c
create mode 100644 drivers/phy/hisilicon/phy-hi3670-usb3.c
--
2.26.2
