[PATCH v2 2/2] dt-bindings: timer: exynos4210-mct: Add missing clocks

[Krzysztof Kozlowski <krzk@xxxxxxxxxx>]

The Exynos Multi Core Timer driver requires two clocks.  This was never
documented in the binding.  Add it to fix dtschema warnings like:

  arch/arm64/boot/dts/exynos/exynos5433-tm2.dt.yaml: timer@101c0000:
    'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>

---

Changes since v1:
1. Add properties instead of using unevaluated
---
 .../timer/samsung,exynos4210-mct.yaml         | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
index 37bd01a62c52..f11cbc7ccc14 100644
--- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
+++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
@@ -23,6 +23,15 @@ properties:
       - samsung,exynos4210-mct
       - samsung,exynos4412-mct
 
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - pattern: "^(fin_pll|mct)$"
+      - pattern: "^(fin_pll|mct)$"
+
   reg:
     maxItems: 1
 
@@ -49,6 +58,8 @@ properties:
 
 required:
   - compatible
+  - clock-names
+  - clocks
   - interrupts
   - reg
 
@@ -59,11 +70,15 @@ examples:
     // In this example, the IP contains two local timers, using separate
     // interrupts, so two local timer interrupts have been specified,
     // in addition to four global timer interrupts.
+    #include <dt-bindings/clock/exynos4.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     timer@10050000 {
         compatible = "samsung,exynos4210-mct";
         reg = <0x10050000 0x800>;
+        clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+        clock-names = "fin_pll", "mct";
+
         interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
@@ -75,11 +90,15 @@ examples:
   - |
     // In this example, the timer interrupts are connected to two separate
     // interrupt controllers. Hence, an interrupts-extended is needed.
+    #include <dt-bindings/clock/exynos4.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     timer@101c0000 {
         compatible = "samsung,exynos4210-mct";
         reg = <0x101C0000 0x800>;
+        clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+        clock-names = "fin_pll", "mct";
+
         interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
                               <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
                               <&combiner 12 6>,
@@ -92,11 +111,14 @@ examples:
     // In this example, the IP contains four local timers, but using
     // a per-processor interrupt to handle them. Only one first local
     // interrupt is specified.
+    #include <dt-bindings/clock/exynos4.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     timer@10050000 {
         compatible = "samsung,exynos4412-mct";
         reg = <0x10050000 0x800>;
+        clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+        clock-names = "fin_pll", "mct";
 
         interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
@@ -109,11 +131,14 @@ examples:
     // In this example, the IP contains four local timers, but using
     // a per-processor interrupt to handle them. All the local timer
     // interrupts are specified.
+    #include <dt-bindings/clock/exynos4.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     timer@10050000 {
         compatible = "samsung,exynos4412-mct";
         reg = <0x10050000 0x800>;
+        clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+        clock-names = "fin_pll", "mct";
 
         interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-- 
2.17.1