The interrupt controller of SD5203 SoC is VIC(vector interrupt controller), it's
based on Synopsys DesignWare APB interrupt controller (dw_apb_ictl) IP, but it
can not directly use dw_apb_ictl driver. The main reason is that VIC is used as
primary interrupt controller and dw_apb_ictl driver worked for secondary
interrupt controller. So add a new driver: "hisilicon,sd5203-vic".
Kefeng Wang (1):
irqchip: add Hisilicon SD5203 vector interrupt controller
Zhen Lei (1):
dt-bindings: interrupt-controller: add Hisilicon SD5203 vector
interrupt controller
.../hisilicon,sd5203-vic.txt | 27 ++++
drivers/irqchip/Kconfig | 5 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-sd5203-vic.c | 128 ++++++++++++++++++
4 files changed, 161 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/hisilicon,sd5203-vic.txt
create mode 100644 drivers/irqchip/irq-sd5203-vic.c
--
2.26.0.106.g9fadedd
