Add binding for ZynqMP R5 OpenAMP. Represent the RPU domain resources in one device node. Each RPU processor is a subnode of the top RPU domain node. Signed-off-by: Ben Levinsky <ben.levinsky@xxxxxxxxxx> Signed-off-by: Jason Wu <j.wu@xxxxxxxxxx> Signed-off-by: Wendy Liang <jliang@xxxxxxxxxx> Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx> --- v3: - update zynqmp_r5 yaml parsing to not raise warnings for extra information in children of R5 node. The warning "node has a unit name, but no reg or ranges property" will still be raised though as this particular node is needed to describe the '#address-cells' and '#size-cells' information. v4:: - remove warning '/example-0/rpu@ff9a0000/r5@0: node has a unit name, but no reg or ranges property' by adding reg to r5 node. v5: - update device tree sample and yaml parsing to not raise any warnings - description for memory-region in yaml parsing - compatible string in yaml parsing for TCM v6: - remove coupling TCM nodes with remoteproc - remove mailbox as it is optional not needed v7: - change lockstep-mode to xlnx,cluster-mode v9: - show example IPC nodes and tcm bank nodes v11: - add property meta-memory-regions to illustrate link between r5 and TCM banks - update so no warnings from 'make dt_binding_check' --- .../xilinx,zynqmp-r5-remoteproc.yaml | 123 ++++++++++++++++++ 1 file changed, 123 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml diff --git a/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml new file mode 100644 index 000000000000..148374c61908 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml#"; +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; + +title: Xilinx R5 remote processor controller bindings + +description: + This document defines the binding for the remoteproc component that loads and + boots firmwares on the Xilinx Zynqmp and Versal family chipset. + + Note that the Linux has global addressing view of the R5-related memory (TCM) + so the absolute address ranges are provided in TCM reg's. +maintainers: + - Ed Mooring <ed.mooring@xxxxxxxxxx> + - Ben Levinsky <ben.levinsky@xxxxxxxxxx> + +properties: + compatible: + const: "xlnx,zynqmp-r5-remoteproc-1.0" + + lockstep-mode: + description: + R5 core configuration (split is 0 or lock-step and 1) + maxItems: 1 + + interrupts: + description: + Interrupt mapping for remoteproc IPI. It is required if the + user uses the remoteproc driver with the RPMsg kernel driver. + maxItems: 6 + + memory-region: + description: + collection of memory carveouts used for elf-loading and inter-processor + communication. + maxItems: 4 + minItems: 4 + meta-memory-regions: + description: + collection of memories that are not present in the top level memory + nodes' mapping. For example, R5s' TCM banks. These banks are needed + for R5 firmware meta data such as the R5 firmware's heap and stack + pnode-id: + maxItems: 1 + mboxes: + maxItems: 2 + mbox-names: + maxItems: 2 + +examples: + - | + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + elf_load: rproc@3ed000000 { + no-map; + reg = <0x3ed00000 0x40000>; + }; + }; + rpu { + compatible = "xlnx,zynqmp-r5-remoteproc-1.0"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + lockstep-mode = <0>; + r5_0 { + ranges; + #address-cells = <1>; + #size-cells = <1>; + memory-region = <&elf_load>; + meta-memory-regions = <0x40 0x41>; + pnode-id = <0x7>; + }; + }; + + /* + * Below nodes are required if using TCM to load R5 firmware + * if not, then either do not provide nodes are label as disabled in + * status property + */ + tcm_0a@ffe00000 { + reg = <0xffe00000 0x10000>; + pnode-id = <0xf>; + no-map; + status = "okay"; + phandle = <0x40>; + compatible = "xlnx,tcm"; + }; + tcm_1a@ffe20000 { + reg = <0xffe20000 0x10000>; + pnode-id = <0x10>; + no-map; + status = "okay"; + compatible = "xlnx,tcm"; + phandle = <0x41>; + }; + + /* + * Below nodes are required for IPC, as Xilinx Kernel + * can potentially have other applications that use CMA + * and conflict from hardware design. With that in mind, + * explicitly state the address spaces for the IPC remoteproc + * mechanisms. + * + * If IPC not required and only elf-loading then these are not needed. + */ + rpu0vdev0vring0: rpu0vdev0vring0@3ed40000 { + no-map; + reg = <0x3ed40000 0x4000>; + }; + rpu0vdev0vring1: rpu0vdev0vring1@3ed44000 { + no-map; + reg = <0x3ed44000 0x4000>; + }; + rpu0vdev0buffer: rpu0vdev0buffer@3ed48000 { + no-map; + reg = <0x3ed48000 0x100000>; + }; + +... -- 2.17.1
