Re: [PATCH net-next 3/3] net: dsa: bcm_sf2: recalculate switch clock rate based on ports

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 01, 2020 at 03:59:13PM -0700, Florian Fainelli wrote:
> Whenever a port gets enabled/disabled, recalcultate the required switch
> clock rate to make sure it always gets set to the expected rate
> targeting our switch use case. This is only done for the BCM7445 switch
> as there is no clocking profile available for BCM7278.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>

Reviewed-by: Andrew Lunn <andrew@xxxxxxx>

    Andrew



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux