Building with W=2 throws up a bunch of easy to fixup errors..
node_name_chars_strict is one of them.. Knock those out.
Signed-off-by: Nishanth Menon <nm@xxxxxx>
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 6 +++---
arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 4 ++--
arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 16 ++++++++--------
.../dts/ti/k3-am654-industrial-thermal.dtsi | 12 ++++++------
.../boot/dts/ti/k3-j721e-common-proc-board.dts | 18 +++++++++---------
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 6 +++---
.../arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 2 +-
8 files changed, 33 insertions(+), 33 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 9c96e3f58c86..ff3e38408dbc 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -305,7 +305,7 @@
no-1-8-v;
};
- scm_conf: scm_conf@100000 {
+ scm_conf: scm-conf@100000 {
compatible = "syscon", "simple-mfd";
reg = <0 0x00100000 0 0x1c000>;
#address-cells = <1>;
@@ -344,7 +344,7 @@
<0x4090 0x3>; /* SERDES1 lane select */
};
- dss_oldi_io_ctrl: dss_oldi_io_ctrl@41E0 {
+ dss_oldi_io_ctrl: dss-oldi-io-ctrl@41E0 {
compatible = "syscon";
reg = <0x0000041E0 0x14>;
};
@@ -445,7 +445,7 @@
ti,interrupt-ranges = <0 392 32>;
};
- main_navss {
+ main-navss {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index 6dfec68ac865..435e51019287 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -6,7 +6,7 @@
*/
&cbass_mcu {
- mcu_conf: scm_conf@40f00000 {
+ mcu_conf: scm-conf@40f00000 {
compatible = "syscon", "simple-mfd";
reg = <0x0 0x40f00000 0x0 0x20000>;
#address-cells = <1>;
@@ -116,7 +116,7 @@
};
};
- mcu_navss {
+ mcu-navss {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 86c9074cb070..d12dd89f3405 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -29,7 +29,7 @@
#address-cells = <2>;
#size-cells = <2>;
ranges;
- secure_ddr: secure_ddr@9e800000 {
+ secure_ddr: secure-ddr@9e800000 {
reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */
alignment = <0x1000>;
no-map;
@@ -70,14 +70,14 @@
>;
};
- push_button_pins_default: push_button__pins_default {
+ push_button_pins_default: push-button-pins-default {
pinctrl-single,pins = <
AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */
AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */
>;
};
- mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins_default {
+ mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
pinctrl-single,pins = <
AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */
AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */
@@ -93,13 +93,13 @@
>;
};
- wkup_pca554_default: wkup_pca554_default {
+ wkup_pca554_default: wkup-pca554-default {
pinctrl-single,pins = <
AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
>;
};
- mcu_cpsw_pins_default: mcu_cpsw_pins_default {
+ mcu_cpsw_pins_default: mcu-cpsw-pins-default {
pinctrl-single,pins = <
AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */
AM65X_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */
@@ -116,7 +116,7 @@
>;
};
- mcu_mdio_pins_default: mcu_mdio1_pins_default {
+ mcu_mdio_pins_default: mcu-mdio1-pins-default {
pinctrl-single,pins = <
AM65X_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
@@ -167,7 +167,7 @@
>;
};
- main_mmc1_pins_default: main_mmc1_pins_default {
+ main_mmc1_pins_default: main-mmc1-pins-default {
pinctrl-single,pins = <
AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */
AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */
@@ -180,7 +180,7 @@
>;
};
- usb1_pins_default: usb1_pins_default {
+ usb1_pins_default: usb1-pins-default {
pinctrl-single,pins = <
AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */
>;
diff --git a/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi
index cdc3d40c3f60..9021c738056b 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi
@@ -2,13 +2,13 @@
#include <dt-bindings/thermal/thermal.h>
-mpu0_thermal: mpu0_thermal {
+mpu0_thermal: mpu0-thermal {
polling-delay-passive = <250>; /* milliseconds */
polling-delay = <500>; /* milliseconds */
thermal-sensors = <&wkup_vtm0 0>;
trips {
- mpu0_crit: mpu0_crit {
+ mpu0_crit: mpu0-crit {
temperature = <125000>; /* milliCelsius */
hysteresis = <2000>; /* milliCelsius */
type = "critical";
@@ -16,13 +16,13 @@ mpu0_thermal: mpu0_thermal {
};
};
-mpu1_thermal: mpu1_thermal {
+mpu1_thermal: mpu1-thermal {
polling-delay-passive = <250>; /* milliseconds */
polling-delay = <500>; /* milliseconds */
thermal-sensors = <&wkup_vtm0 1>;
trips {
- mpu1_crit: mpu1_crit {
+ mpu1_crit: mpu1-crit {
temperature = <125000>; /* milliCelsius */
hysteresis = <2000>; /* milliCelsius */
type = "critical";
@@ -30,13 +30,13 @@ mpu1_thermal: mpu1_thermal {
};
};
-mcu_thermal: mcu_thermal {
+mcu_thermal: mcu-thermal {
polling-delay-passive = <250>; /* milliseconds */
polling-delay = <500>; /* milliseconds */
thermal-sensors = <&wkup_vtm0 2>;
trips {
- mcu_crit: mcu_crit {
+ mcu_crit: mcu-crit {
temperature = <125000>; /* milliCelsius */
hysteresis = <2000>; /* milliCelsius */
type = "critical";
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index c355692796a9..648267284582 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -86,13 +86,13 @@
};
&main_pmx0 {
- sw10_button_pins_default: sw10_button_pins_default {
+ sw10_button_pins_default: sw10-button-pins-default {
pinctrl-single,pins = <
J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18) EXTINTn.GPIO0_0 */
>;
};
- main_mmc1_pins_default: main_mmc1_pins_default {
+ main_mmc1_pins_default: main-mmc1-pins-default {
pinctrl-single,pins = <
J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */
J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */
@@ -106,14 +106,14 @@
>;
};
- main_usbss0_pins_default: main_usbss0_pins_default {
+ main_usbss0_pins_default: main-usbss0-pins-default {
pinctrl-single,pins = <
J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */
J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */
>;
};
- main_usbss1_pins_default: main_usbss1_pins_default {
+ main_usbss1_pins_default: main-usbss1-pins-default {
pinctrl-single,pins = <
J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */
>;
@@ -153,7 +153,7 @@
>;
};
- mcasp10_pins_default: mcasp10_pins_default {
+ mcasp10_pins_default: mcasp10-pins-default {
pinctrl-single,pins = <
J721E_IOPAD(0x158, PIN_OUTPUT_PULLDOWN, 12) /* (U23) RGMII5_TX_CTL.MCASP10_ACLKX */
J721E_IOPAD(0x15c, PIN_OUTPUT_PULLDOWN, 12) /* (U26) RGMII5_RX_CTL.MCASP10_AFSX */
@@ -167,7 +167,7 @@
>;
};
- audi_ext_refclk2_pins_default: audi_ext_refclk2_pins_default {
+ audi_ext_refclk2_pins_default: audi-ext-refclk2-pins-default {
pinctrl-single,pins = <
J721E_IOPAD(0x1a4, PIN_OUTPUT, 3) /* (W26) RGMII6_RXC.AUDIO_EXT_REFCLK2 */
>;
@@ -175,7 +175,7 @@
};
&wkup_pmx0 {
- sw11_button_pins_default: sw11_button_pins_default {
+ sw11_button_pins_default: sw11-button-pins-default {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */
>;
@@ -194,7 +194,7 @@
>;
};
- mcu_cpsw_pins_default: mcu_cpsw_pins_default {
+ mcu_cpsw_pins_default: mcu-cpsw-pins-default {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
J721E_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
@@ -211,7 +211,7 @@
>;
};
- mcu_mdio_pins_default: mcu_mdio1_pins_default {
+ mcu_mdio_pins_default: mcu-mdio1-pins-default {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* MCU_MDIO0_MDC */
J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_MDIO0_MDIO */
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 1d2a7c05b6f3..ea57d07777ba 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -86,7 +86,7 @@
ti,interrupt-ranges = <8 392 56>;
};
- main_navss {
+ main-navss {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
@@ -888,7 +888,7 @@
no-1-8-v;
};
- usbss0: cdns_usb@4104000 {
+ usbss0: cdns-usb@4104000 {
compatible = "ti,j721e-usb";
reg = <0x00 0x4104000 0x00 0x100>;
dma-coherent;
@@ -918,7 +918,7 @@
};
};
- usbss1: cdns_usb@4114000 {
+ usbss1: cdns-usb@4114000 {
compatible = "ti,j721e-usb";
reg = <0x00 0x4114000 0x00 0x100>;
dma-coherent;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index 81801f519a61..03fa69c0a038 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -249,7 +249,7 @@
};
};
- mcu_navss {
+ mcu-navss {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
index d69d90c8b5e3..5dc3ba739131 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -71,7 +71,7 @@
};
&wkup_pmx0 {
- wkup_i2c0_pins_default: wkup_i2c0_pins_default {
+ wkup_i2c0_pins_default: wkup-i2c0-pins-default {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */
J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
--
2.17.1
