[PATCH 2/2] dt-bindings: mmc: mmc-pwreq-simple: Accept more than one reset GPIO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There might be multiple reset GPIOs but dtschema has trouble parsing it
if there are no maxItems:

  arch/arm/boot/dts/exynos5250-snow.dt.yaml: mmc3_pwrseq: reset-gpios: [[20, 2, 1], [20, 1, 1]] is too long
    From schema: Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml

Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
index 449215444723..8d625f903856 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
@@ -20,6 +20,8 @@ properties:
 
   reset-gpios:
     minItems: 1
+    # Put some limit to avoid false warnings
+    maxItems: 32
     description:
       contains a list of GPIO specifiers. The reset GPIOs are asserted
       at initialization and prior we start the power up procedure of the card.
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux