[PATCH] arm64: dts: amd: replace status value "ok" by "okay"

[Adrian Schmutzler <freifunk@xxxxxxxxxxxxxxxxxxx>]

While the DT parser recognizes "ok" as a valid value for the
"status" property, it is actually mentioned nowhere. Use the
proper value "okay" instead, as done in the majority of files
already.

Signed-off-by: Adrian Schmutzler <freifunk@xxxxxxxxxxxxxxxxxxx>
---
 .../boot/dts/amd/amd-overdrive-rev-b0.dts     | 22 ++++++++---------
 .../boot/dts/amd/amd-overdrive-rev-b1.dts     | 24 +++++++++----------
 arch/arm64/boot/dts/amd/amd-overdrive.dts     | 14 +++++------
 arch/arm64/boot/dts/amd/husky.dts             | 20 ++++++++--------
 4 files changed, 40 insertions(+), 40 deletions(-)

diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
index 8e341be9a399..a77f19ac63cd 100644
--- a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
@@ -25,7 +25,7 @@
 };
 
 &ccp0 {
-	status = "ok";
+	status = "okay";
 	amd,zlib-support = <1>;
 };
 
@@ -33,39 +33,39 @@
  * NOTE: In Rev.B, gpio0 is reserved.
  */
 &gpio1 {
-	status = "ok";
+	status = "okay";
 };
 
 &gpio2 {
-	status = "ok";
+	status = "okay";
 };
 
 &gpio3 {
-	status = "ok";
+	status = "okay";
 };
 
 &gpio4 {
-	status = "ok";
+	status = "okay";
 };
 
 &i2c0 {
-	status = "ok";
+	status = "okay";
 };
 
 &i2c1 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie0 {
-	status = "ok";
+	status = "okay";
 };
 
 &spi0 {
-	status = "ok";
+	status = "okay";
 };
 
 &spi1 {
-	status = "ok";
+	status = "okay";
 	sdcard0: sdcard@0 {
 		compatible = "mmc-spi-slot";
 		reg = <0>;
@@ -80,7 +80,7 @@
 };
 
 &ipmi_kcs {
-	status = "ok";
+	status = "okay";
 };
 
 &smb0 {
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
index 92cef05c6b74..09fc9c3ac60f 100644
--- a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
@@ -25,7 +25,7 @@
 };
 
 &ccp0 {
-	status = "ok";
+	status = "okay";
 	amd,zlib-support = <1>;
 };
 
@@ -33,43 +33,43 @@
  * NOTE: In Rev.B, gpio0 is reserved.
  */
 &gpio1 {
-	status = "ok";
+	status = "okay";
 };
 
 &gpio2 {
-	status = "ok";
+	status = "okay";
 };
 
 &gpio3 {
-	status = "ok";
+	status = "okay";
 };
 
 &gpio4 {
-	status = "ok";
+	status = "okay";
 };
 
 &i2c0 {
-	status = "ok";
+	status = "okay";
 };
 
 &i2c1 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie0 {
-	status = "ok";
+	status = "okay";
 };
 
 &sata1 {
-	status = "ok";
+	status = "okay";
 };
 
 &spi0 {
-	status = "ok";
+	status = "okay";
 };
 
 &spi1 {
-	status = "ok";
+	status = "okay";
 	sdcard0: sdcard@0 {
 		compatible = "mmc-spi-slot";
 		reg = <0>;
@@ -84,7 +84,7 @@
 };
 
 &ipmi_kcs {
-	status = "ok";
+	status = "okay";
 };
 
 &smb0 {
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive.dts b/arch/arm64/boot/dts/amd/amd-overdrive.dts
index 41b3a6c0993d..56f27c71a15b 100644
--- a/arch/arm64/boot/dts/amd/amd-overdrive.dts
+++ b/arch/arm64/boot/dts/amd/amd-overdrive.dts
@@ -19,31 +19,31 @@
 };
 
 &ccp0 {
-	status = "ok";
+	status = "okay";
 };
 
 &gpio0 {
-	status = "ok";
+	status = "okay";
 };
 
 &gpio1 {
-	status = "ok";
+	status = "okay";
 };
 
 &i2c0 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie0 {
-	status = "ok";
+	status = "okay";
 };
 
 &spi0 {
-	status = "ok";
+	status = "okay";
 };
 
 &spi1 {
-	status = "ok";
+	status = "okay";
 	sdcard0: sdcard@0 {
 		compatible = "mmc-spi-slot";
 		reg = <0>;
diff --git a/arch/arm64/boot/dts/amd/husky.dts b/arch/arm64/boot/dts/amd/husky.dts
index 7acde34772cb..f68c95fe0e90 100644
--- a/arch/arm64/boot/dts/amd/husky.dts
+++ b/arch/arm64/boot/dts/amd/husky.dts
@@ -25,7 +25,7 @@
 };
 
 &ccp0 {
-	status = "ok";
+	status = "okay";
 	amd,zlib-support = <1>;
 };
 
@@ -33,39 +33,39 @@
  * NOTE: In Rev.B, gpio0 is reserved.
  */
 &gpio1 {
-	status = "ok";
+	status = "okay";
 };
 
 &gpio2 {
-	status = "ok";
+	status = "okay";
 };
 
 &gpio3 {
-	status = "ok";
+	status = "okay";
 };
 
 &gpio4 {
-	status = "ok";
+	status = "okay";
 };
 
 &i2c0 {
-	status = "ok";
+	status = "okay";
 };
 
 &i2c1 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie0 {
-	status = "ok";
+	status = "okay";
 };
 
 &spi0 {
-	status = "ok";
+	status = "okay";
 };
 
 &spi1 {
-	status = "ok";
+	status = "okay";
 	sdcard0: sdcard@0 {
 		compatible = "mmc-spi-slot";
 		reg = <0>;
-- 
2.20.1