While the DT parser recognizes "ok" as a valid value for the
"status" property, it is actually mentioned nowhere. Use the
proper value "okay" instead, as done in the majority of files
already.
Signed-off-by: Adrian Schmutzler <freifunk@xxxxxxxxxxxxxxxxxxx>
---
.../arm/boot/dts/qcom-apq8060-dragonboard.dts | 12 +++----
.../boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 8 ++---
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 8 ++---
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 10 +++---
.../dts/qcom-apq8064-sony-xperia-yuga.dts | 4 +--
.../arm/boot/dts/qcom-apq8074-dragonboard.dts | 10 +++---
arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 18 +++++------
.../boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts | 4 +--
arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi | 10 +++---
.../boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts | 8 ++---
.../boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts | 2 +-
arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi | 10 +++---
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 2 +-
arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi | 12 +++----
arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi | 16 +++++-----
arch/arm/boot/dts/qcom-msm8660-surf.dts | 4 +--
arch/arm/boot/dts/qcom-msm8960-cdp.dts | 8 ++---
.../boot/dts/qcom-msm8974-fairphone-fp2.dts | 14 ++++----
.../qcom-msm8974-lge-nexus5-hammerhead.dts | 32 +++++++++----------
.../boot/dts/qcom-msm8974-samsung-klte.dts | 8 ++---
.../dts/qcom-msm8974-sony-xperia-amami.dts | 14 ++++----
.../dts/qcom-msm8974-sony-xperia-castor.dts | 18 +++++------
.../dts/qcom-msm8974-sony-xperia-honami.dts | 16 +++++-----
23 files changed, 124 insertions(+), 124 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index 4e6c50d45cb2..dace8ffeb991 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -461,11 +461,11 @@
};
gsbi@19800000 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_I2C>;
i2c@19880000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dragon_gsbi8_i2c_pins>;
@@ -497,17 +497,17 @@
};
gsbi@19c00000 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@19c40000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dragon_gsbi12_serial_pins>;
};
i2c@19c80000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dragon_gsbi12_i2c_pins>;
@@ -571,7 +571,7 @@
external-bus@1a100000 {
/* The EBI2 will instantiate first, then populate its children */
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dragon_ebi2_pins>;
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
index a701d4bac320..3bce47d16ab3 100644
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -302,11 +302,11 @@
};
gsbi@16500000 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@16540000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&gsbi6_uart_4pins>;
@@ -314,10 +314,10 @@
};
gsbi@16600000 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@16640000 {
- status = "ok";
+ status = "okay";
};
};
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 209eb21cea00..0148148a8e0a 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -141,10 +141,10 @@
};
gsbi@16600000 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@16640000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&gsbi7_uart_2pins>;
};
@@ -152,7 +152,7 @@
/* OTG */
usb@12500000 {
- status = "ok";
+ status = "okay";
dr_mode = "otg";
ulpi {
phy {
@@ -209,7 +209,7 @@
};
pci@1b500000 {
- status = "ok";
+ status = "okay";
vdda-supply = <&pm8921_s3>;
vdda_phy-supply = <&pm8921_lvs6>;
vdda_refclk-supply = <&v3p3_fixed>;
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 83aaf4a74398..d0a17b5a5fa3 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -215,21 +215,21 @@
};
gsbi@16500000 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_UART_W_FC>;
serial@16540000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&gsbi6_uart_4pins>;
};
};
gsbi@16600000 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@16640000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&gsbi7_uart_2pins>;
};
@@ -279,7 +279,7 @@
};
pci@1b500000 {
- status = "ok";
+ status = "okay";
vdda-supply = <&pm8921_s3>;
vdda_phy-supply = <&pm8921_lvs6>;
vdda_refclk-supply = <&ext_3p3v>;
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
index 8bf488fb86ad..72e47bdc5c12 100644
--- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
@@ -362,11 +362,11 @@
};
gsbi@1a200000 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@1a240000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&gsbi5_uart_pin_a>;
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
index 244f04e19c9d..83793b835d40 100644
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -19,13 +19,13 @@
soc {
serial@f991e000 {
- status = "ok";
+ status = "okay";
};
sdhci@f9824900 {
bus-width = <8>;
non-removable;
- status = "ok";
+ status = "okay";
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
@@ -39,14 +39,14 @@
pinctrl-names = "default";
pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
bus-width = <4>;
- status = "ok";
+ status = "okay";
vmmc-supply = <&pm8941_l21>;
vqmmc-supply = <&pm8941_l13>;
};
usb@f9a55000 {
- status = "ok";
+ status = "okay";
phys = <&usb_hs2_phy>;
phy-select = <&tcsr 0xb000 1>;
extcon = <&smbb>, <&usb_id>;
@@ -56,7 +56,7 @@
adp-disable;
ulpi {
phy@b {
- status = "ok";
+ status = "okay";
v3p3-supply = <&pm8941_l24>;
v1p8-supply = <&pm8941_l6>;
extcon = <&smbb>;
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
index 418f9a022336..c93b2164db44 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -30,7 +30,7 @@
soc {
rng@22000 {
- status = "ok";
+ status = "okay";
};
pinctrl@1000000 {
@@ -66,13 +66,13 @@
};
blsp_dma: dma@7884000 {
- status = "ok";
+ status = "okay";
};
spi@78b5000 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
cs-gpios = <&tlmm 54 0>;
mx25l25635e@0 {
@@ -87,27 +87,27 @@
serial@78af000 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
};
cryptobam: dma@8e04000 {
- status = "ok";
+ status = "okay";
};
crypto@8e3a000 {
- status = "ok";
+ status = "okay";
};
watchdog@b017000 {
- status = "ok";
+ status = "okay";
};
wifi@a000000 {
- status = "ok";
+ status = "okay";
};
wifi@a800000 {
- status = "ok";
+ status = "okay";
};
};
};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
index 7a96f300bc8d..b0f476ff017f 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
@@ -9,11 +9,11 @@
soc {
dma@7984000 {
- status = "ok";
+ status = "okay";
};
qpic-nand@79b0000 {
- status = "ok";
+ status = "okay";
};
};
};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
index 7c1eb1963c67..7a337dc08741 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
@@ -70,23 +70,23 @@
serial@78af000 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
};
serial@78b0000 {
pinctrl-0 = <&serial_1_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
};
dma@7884000 {
- status = "ok";
+ status = "okay";
};
spi@78b5000 { /* BLSP1 QUP1 */
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
cs-gpios = <&tlmm 12 0>;
m25p80@0 {
@@ -99,7 +99,7 @@
};
pci@40000000 {
- status = "ok";
+ status = "okay";
perst-gpio = <&tlmm 38 0x1>;
};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
index 8c7ef6537ae6..f343a2244386 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
@@ -9,12 +9,12 @@
soc {
pci@40000000 {
- status = "ok";
+ status = "okay";
perst-gpio = <&tlmm 38 0x1>;
};
spi@78b6000 {
- status = "ok";
+ status = "okay";
};
pinctrl@1000000 {
@@ -43,13 +43,13 @@
serial@78b0000 {
pinctrl-0 = <&serial_1_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
};
spi@78b5000 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
cs-gpios = <&tlmm 12 0>;
m25p80@0 {
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts
index af7a9028d492..582acb681a98 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts
@@ -19,7 +19,7 @@
serial@78b0000 {
pinctrl-0 = <&serial_1_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
};
};
};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
index 9f1a5a668772..94872518b5a2 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
@@ -49,27 +49,27 @@
serial@78af000 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
};
dma@7884000 {
- status = "ok";
+ status = "okay";
};
i2c@78b7000 { /* BLSP1 QUP2 */
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
};
dma@7984000 {
- status = "ok";
+ status = "okay";
};
qpic-nand@79b0000 {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
};
};
};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index 554c65e7aa0e..e5b9b9cf6097 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -24,7 +24,7 @@
gsbi@16300000 {
i2c@16380000 {
- status = "ok";
+ status = "okay";
clock-frequency = <200000>;
pinctrl-0 = <&i2c4_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
index e239a0486936..65330065390a 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
@@ -16,19 +16,19 @@
soc {
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "ok";
+ status = "okay";
serial@16340000 {
- status = "ok";
+ status = "okay";
};
};
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
- status = "ok";
+ status = "okay";
spi4: spi@1a280000 {
- status = "ok";
+ status = "okay";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
@@ -57,12 +57,12 @@
};
sata-phy@1b400000 {
- status = "ok";
+ status = "okay";
};
sata@29000000 {
ports-implemented = <0x1>;
- status = "ok";
+ status = "okay";
};
gpio_keys {
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
index 26b034bd19d2..a725b73b5a2e 100644
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
@@ -125,12 +125,12 @@
};
&gsbi3 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_SPI>;
};
&gsbi3_spi {
- status = "ok";
+ status = "okay";
pinctrl-0 = <&gsbi3_pins>;
pinctrl-names = "default";
assigned-clocks = <&gcc GSBI3_QUP_CLK>;
@@ -138,34 +138,34 @@
};
&gsbi4 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_UART_W_FC>;
};
&gsbi4_serial {
- status = "ok";
+ status = "okay";
pinctrl-0 = <&gsbi4_pins>;
pinctrl-names = "default";
};
&gsbi5 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
};
&gsbi5_i2c {
- status = "ok";
+ status = "okay";
clock-frequency = <200000>;
pinctrl-0 = <&gsbi5_i2c_pins>;
pinctrl-names = "default";
};
&gsbi5_serial {
- status = "ok";
+ status = "okay";
pinctrl-0 = <&gsbi5_uart_pins>;
pinctrl-names = "default";
};
&sdcc1 {
- status = "ok";
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
index f01a11b18d6a..6a321ccb0bd0 100644
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -17,10 +17,10 @@
soc {
gsbi@19c00000 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@19c40000 {
- status = "ok";
+ status = "okay";
};
};
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index 82d5d8267adf..e7d2e937ea4c 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -17,10 +17,10 @@
soc {
gsbi@16400000 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@16440000 {
- status = "ok";
+ status = "okay";
};
};
@@ -273,12 +273,12 @@
};
gsbi@16000000 {
- status = "ok";
+ status = "okay";
qcom,mode = <GSBI_PROT_SPI>;
pinctrl-names = "default";
pinctrl-0 = <&spi1_default>;
spi@16080000 {
- status = "ok";
+ status = "okay";
eth@0 {
compatible = "micrel,ks8851";
reg = <0>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
index d2d48770ec0f..ea15b645b229 100644
--- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
@@ -256,11 +256,11 @@
&soc {
serial@f991e000 {
- status = "ok";
+ status = "okay";
};
remoteproc@fb21b000 {
- status = "ok";
+ status = "okay";
vddmx-supply = <&pm8841_s1>;
vddcx-supply = <&pm8841_s2>;
@@ -273,7 +273,7 @@
label = "pronto";
wcnss {
- status = "ok";
+ status = "okay";
};
};
};
@@ -335,7 +335,7 @@
};
sdhci@f9824900 {
- status = "ok";
+ status = "okay";
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
@@ -348,7 +348,7 @@
};
sdhci@f98a4900 {
- status = "ok";
+ status = "okay";
vmmc-supply = <&pm8941_l21>;
vqmmc-supply = <&pm8941_l13>;
@@ -360,7 +360,7 @@
};
usb@f9a55000 {
- status = "ok";
+ status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
@@ -373,7 +373,7 @@
ulpi {
phy@a {
- status = "ok";
+ status = "okay";
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 32b474bfeec3..047387e5eaee 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -239,7 +239,7 @@
&soc {
serial@f991d000 {
- status = "ok";
+ status = "okay";
};
pinctrl@fd510000 {
@@ -410,7 +410,7 @@
};
sdhci@f9824900 {
- status = "ok";
+ status = "okay";
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
@@ -423,7 +423,7 @@
};
sdhci@f98a4900 {
- status = "ok";
+ status = "okay";
max-frequency = <100000000>;
bus-width = <4>;
@@ -471,7 +471,7 @@
};
serial@f9960000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&blsp2_uart10_pin_a>;
@@ -490,7 +490,7 @@
};
i2c@f9967000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c11_pins>;
clock-frequency = <355000>;
@@ -498,7 +498,7 @@
led-controller@38 {
compatible = "ti,lm3630a";
- status = "ok";
+ status = "okay";
reg = <0x38>;
#address-cells = <1>;
@@ -514,7 +514,7 @@
};
i2c@f9968000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c12_pins>;
clock-frequency = <100000>;
@@ -551,7 +551,7 @@
};
i2c@f9923000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <100000>;
@@ -569,7 +569,7 @@
};
i2c@f9924000 {
- status = "ok";
+ status = "okay";
clock-frequency = <355000>;
qcom,src-freq = <50000000>;
@@ -604,7 +604,7 @@
};
i2c@f9925000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
clock-frequency = <100000>;
@@ -622,7 +622,7 @@
};
usb@f9a55000 {
- status = "ok";
+ status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
@@ -636,7 +636,7 @@
ulpi {
phy@a {
- status = "ok";
+ status = "okay";
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
@@ -647,14 +647,14 @@
};
mdss@fd900000 {
- status = "ok";
+ status = "okay";
mdp@fd900000 {
- status = "ok";
+ status = "okay";
};
dsi@fd922800 {
- status = "ok";
+ status = "okay";
vdda-supply = <&pm8941_l2>;
vdd-supply = <&pm8941_lvs3>;
@@ -688,7 +688,7 @@
};
dsi-phy@fd922a00 {
- status = "ok";
+ status = "okay";
vddio-supply = <&pm8941_l12>;
};
diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
index d4dc98214225..2dd01e665f27 100644
--- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
@@ -208,7 +208,7 @@
&soc {
serial@f991e000 {
- status = "ok";
+ status = "okay";
};
gpio-keys {
@@ -261,7 +261,7 @@
};
sdhci@f9824900 {
- status = "ok";
+ status = "okay";
vmmc-supply = <&pma8084_l20>;
vqmmc-supply = <&pma8084_s4>;
@@ -274,7 +274,7 @@
};
usb@f9a55000 {
- status = "ok";
+ status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
@@ -287,7 +287,7 @@
ulpi {
phy@a {
- status = "ok";
+ status = "okay";
v1p8-supply = <&pma8084_l6>;
v3p3-supply = <&pma8084_l24>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
index 5669f5f58a86..398a3eaf306b 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
@@ -261,7 +261,7 @@
&soc {
sdhci@f9824900 {
- status = "ok";
+ status = "okay";
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
@@ -274,7 +274,7 @@
};
sdhci@f98a4900 {
- status = "ok";
+ status = "okay";
bus-width = <4>;
@@ -288,7 +288,7 @@
};
serial@f991e000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_uart2_pin_a>;
@@ -366,7 +366,7 @@
};
usb@f9a55000 {
- status = "ok";
+ status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
@@ -379,7 +379,7 @@
ulpi {
phy@a {
- status = "ok";
+ status = "okay";
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
@@ -415,7 +415,7 @@
};
coincell@2800 {
- status = "ok";
+ status = "okay";
qcom,rset-ohms = <2100>;
qcom,vset-millivolts = <3000>;
};
@@ -423,7 +423,7 @@
pm8941@1 {
wled@d800 {
- status = "ok";
+ status = "okay";
qcom,cs-out;
qcom,current-limit = <20>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts
index 701b396719c7..f4ec08f13003 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts
@@ -279,7 +279,7 @@
&soc {
sdhci@f9824900 {
- status = "ok";
+ status = "okay";
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
@@ -292,7 +292,7 @@
};
sdhci@f9864900 {
- status = "ok";
+ status = "okay";
max-frequency = <100000000>;
non-removable;
@@ -316,7 +316,7 @@
};
sdhci@f98a4900 {
- status = "ok";
+ status = "okay";
bus-width = <4>;
@@ -330,14 +330,14 @@
};
serial@f991e000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_uart2_pin_a>;
};
usb@f9a55000 {
- status = "ok";
+ status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
@@ -350,7 +350,7 @@
ulpi {
phy@a {
- status = "ok";
+ status = "okay";
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
@@ -482,7 +482,7 @@
};
i2c@f9964000 {
- status = "ok";
+ status = "okay";
clock-frequency = <355000>;
qcom,src-freq = <50000000>;
@@ -522,7 +522,7 @@
};
i2c@f9967000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c11_pins>;
clock-frequency = <355000>;
@@ -635,7 +635,7 @@
};
coincell@2800 {
- status = "ok";
+ status = "okay";
qcom,rset-ohms = <2100>;
qcom,vset-millivolts = <3000>;
};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index 611bae9fe66b..9743beebd84d 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -261,7 +261,7 @@
&soc {
usb@f9a55000 {
- status = "ok";
+ status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
@@ -274,7 +274,7 @@
ulpi {
phy@a {
- status = "ok";
+ status = "okay";
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
@@ -286,7 +286,7 @@
};
sdhci@f9824900 {
- status = "ok";
+ status = "okay";
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
@@ -299,7 +299,7 @@
};
sdhci@f98a4900 {
- status = "ok";
+ status = "okay";
bus-width = <4>;
@@ -313,14 +313,14 @@
};
serial@f991e000 {
- status = "ok";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_uart2_pin_a>;
};
i2c@f9924000 {
- status = "ok";
+ status = "okay";
clock-frequency = <355000>;
qcom,src-freq = <50000000>;
@@ -464,7 +464,7 @@
};
coincell@2800 {
- status = "ok";
+ status = "okay";
qcom,rset-ohms = <2100>;
qcom,vset-millivolts = <3000>;
};
@@ -472,7 +472,7 @@
pm8941@1 {
wled@d800 {
- status = "ok";
+ status = "okay";
qcom,cs-out;
qcom,current-limit = <20>;
--
2.20.1
