Hi Jagan. On Fri, Aug 28, 2020 at 09:29:38PM +0530, Jagan Teki wrote: > Add Ampire, AM-1280800N3TZQW-T00H 10.1" TFT LCD panel timings. > > Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> > --- > drivers/gpu/drm/panel/panel-simple.c | 28 ++++++++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > > diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c > index b6ecd1552132..c988fe8094f8 100644 > --- a/drivers/gpu/drm/panel/panel-simple.c > +++ b/drivers/gpu/drm/panel/panel-simple.c > @@ -592,6 +592,31 @@ static void panel_simple_shutdown(struct device *dev) > drm_panel_unprepare(&panel->base); > } > > +static const struct drm_display_mode ampire_am_1280800n3tzqw_t00h_mode = { > + .clock = 71100, > + .hdisplay = 1280, > + .hsync_start = 1280 + 40, > + .hsync_end = 1280 + 40 + 80, > + .htotal = 1280 + 40 + 80 + 40, > + .vdisplay = 800, > + .vsync_start = 800 + 3, > + .vsync_end = 800 + 3 + 10, > + .vtotal = 800 + 3 + 10 + 10, > + .vrefresh = 60, No longer preset - delete. > + .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC, > +}; > + > +static const struct panel_desc ampire_am_1280800n3tzqw_t00h = { > + .modes = &ire_am_1280800n3tzqw_t00h_mode, > + .num_modes = 1, > + .bpc = 6, > + .size = { > + .width = 217, > + .height = 136, > + }, > + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, > +}; .connector_type is mandatory today. And based on connector type you may need to specify .bus_flags. Sam > + > static const struct drm_display_mode ampire_am_480272h3tmqw_t01h_mode = { > .clock = 9000, > .hdisplay = 480, > @@ -3637,6 +3662,9 @@ static const struct panel_desc arm_rtsm = { > > static const struct of_device_id platform_of_match[] = { > { > + .compatible = "ampire,am-1280800n3tzqw-t00h", > + .data = &ire_am_1280800n3tzqw_t00h, > + }, { > .compatible = "ampire,am-480272h3tmqw-t01h", > .data = &ire_am_480272h3tmqw_t01h, > }, { > -- > 2.25.1