Adding display timings directly on device tree files make it difficult to maintain as a same copy of timings may exist on different files or panel-simple driver. We have a panel-simple driver for this particular usage so supporting on this driver will help to use the same timings on any device tree files if the board mounted on a similar vendor display. Engicam C.TOUCH OF 10.1" LCD board uses Ampire 10.1" TFT LCD and it has supported by panel-simple already, so simply use that binding. Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> --- Note: Panel patch in ML already, https://lkml.org/lkml/2020/8/28/685 arch/arm/boot/dts/imx6q-icore-ofcap10.dts | 28 +++++++++++++---------- 1 file changed, 16 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts index 81cc346dd149..02aca1e28ce3 100644 --- a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts +++ b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts @@ -12,6 +12,17 @@ / { model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 10.1 Kit"; compatible = "engicam,imx6-icore", "fsl,imx6q"; + + panel { + compatible = "ampire,am-1280800n3tzqw-t00h"; + backlight = <&backlight_lvds>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; }; &ldb { @@ -22,18 +33,11 @@ lvds-channel@0 { fsl,data-width = <24>; status = "okay"; - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <60000000>; - hactive = <1280>; - vactive = <800>; - hback-porch = <40>; - hfront-porch = <40>; - vback-porch = <10>; - vfront-porch = <3>; - hsync-len = <80>; - vsync-len = <10>; + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; -- 2.25.1
