Hi Tobias On 8/15/20 12:35 AM, Tobias Schramm wrote:
The stm32 spi driver tries to determine the fifo size of spi devices dynamically. However, if the spi was already configured by the bootloader the fifo size check can become an endless loop, because the driver expects the spi to be in its initial "after device reset" state. The driver does already support resetting the spi device at probe, thus this patch adds only the required device tree properties Signed-off-by: Tobias Schramm <t.schramm@xxxxxxxxxxx>
Applied on stm32-next. Thanks. Alex
