Re: [RESEND2 PATCH v4 2/2] i2c: sunxi: add P2WI (Push/Pull 2 Wire Interface) controller support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hello Paul,

On 10/06/2014 10:56, Paul Carpenter wrote:
> Wolfram Sang wrote:
>> On Tue, Jun 03, 2014 at 10:49:52AM +0200, Boris BREZILLON wrote:
>>> The P2WI looks like an SMBus controller which only supports byte data
>>> transfers. But, it differs from standard SMBus protocol on several
>>> aspects:
>>> - it supports only one slave device, and thus drop the address field
>>> - it adds a parity bit every 8bits of data
>>> - only one read access is required to read a byte (instead of a read
>>>   followed by a write access in standard SMBus protocol)
>
> Minor quibble should be
> "(instead of a write followed by a read access in standard SMBus
>   protocol)"
>

Fixed.

Thanks for pointing this out.

Best Regards,

Boris


-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux