Hello, This series adds support for the P2WI block used by some Allwinner boards to interface with the AXP221 PMIC. Best Regards, Boris Changes since v4: - add P2WI protocol description in driver header comment - remove unneeded i2c address check - remove unneeded irq field from p2wi struct Changes since v3: - update the DT bindings doc - fix a comment that was no longer true Changes since v2: - drop the initialization (switch from I2C to P2WI mode) part - print devm_ioremap_resource err code Boris BREZILLON (2): i2c: sunxi: add P2WI DT bindings documentation i2c: sunxi: add P2WI (Push/Pull 2 Wire Interface) controller support .../devicetree/bindings/i2c/i2c-sunxi-p2wi.txt | 41 +++ drivers/i2c/busses/Kconfig | 12 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-sun6i-p2wi.c | 356 +++++++++++++++++++++ 4 files changed, 410 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt create mode 100644 drivers/i2c/busses/i2c-sun6i-p2wi.c -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
