Hey Ben, On Wed, Aug 26, 2020 at 06:58:05PM -0700, Ben Levinsky wrote: > v10: > - add include types.h to xlnx-zynqmp.h for compilation I appreciate the quick turnaround on v10, but it looks like much of my feedback on v9 went unacknowledged. Most concerning is the fact that loading firmware on to R5 1 is _still_ broken in v10 due to the incorrect TCM banks being used. Thanks, Michael > > Ben Levinsky (5): > firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU > configuration. > firmware: xilinx: Add shutdown/wakeup APIs > firmware: xilinx: Add RPU configuration APIs > dt-bindings: remoteproc: Add documentation for ZynqMP R5 rproc > bindings > remoteproc: Add initial zynqmp R5 remoteproc driver > > .../xilinx,zynqmp-r5-remoteproc.yaml | 113 +++ > drivers/firmware/xilinx/zynqmp.c | 86 ++ > drivers/remoteproc/Kconfig | 10 + > drivers/remoteproc/Makefile | 1 + > drivers/remoteproc/zynqmp_r5_remoteproc.c | 898 ++++++++++++++++++ > include/linux/firmware/xlnx-zynqmp.h | 63 ++ > 6 files changed, 1171 insertions(+) > create mode 100644 Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml > create mode 100644 drivers/remoteproc/zynqmp_r5_remoteproc.c > > -- > 2.17.1 >
