Torrent PHY can be used in different multi-link multi-protocol configurations including protocols other than DisplayPort also, such as PCIe, USB, SGMII, QSGMII etc. Update the bindings to have support for these configurations. Signed-off-by: Swapnil Jakhade <sjakhade@xxxxxxxxxxx> --- .../bindings/phy/phy-cadence-torrent.yaml | 76 ++++++++++++++----- 1 file changed, 58 insertions(+), 18 deletions(-) diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml index a7ee19d27c19..1b9e1231f8d8 100644 --- a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml +++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml @@ -4,11 +4,13 @@ $id: "http://devicetree.org/schemas/phy/phy-cadence-torrent.yaml#"; $schema: "http://devicetree.org/meta-schemas/core.yaml#"; -title: Cadence Torrent SD0801 PHY binding for DisplayPort +title: Cadence Torrent SD0801 PHY binding description: This binding describes the Cadence SD0801 PHY (also known as Torrent PHY) - hardware included with the Cadence MHDP DisplayPort controller. + hardware included with the Cadence MHDP DisplayPort controller. Torrent + PHY also supports multilink multiprotocol combinations including protocols + such as PCIe, USB, SGMII, QSGMII etc. maintainers: - Swapnil Jakhade <sjakhade@xxxxxxxxxxx> @@ -49,13 +51,14 @@ properties: - const: dptx_phy resets: - maxItems: 1 - description: - Torrent PHY reset. - See Documentation/devicetree/bindings/reset/reset.txt + minItems: 1 + maxItems: 2 + items: + - description: Torrent PHY reset. + - description: Torrent APB reset. This is optional. patternProperties: - '^phy@[0-7]+$': + '^link@[0-7]+$': type: object description: Each group of PHY lanes with a single master lane should be represented as a sub-node. @@ -78,13 +81,13 @@ patternProperties: Specifies the type of PHY for which the group of PHY lanes is used. Refer include/dt-bindings/phy/phy.h. Constants from the header should be used. $ref: /schemas/types.yaml#/definitions/uint32 - enum: [1, 2, 3, 4, 5, 6] + enum: [1, 2, 3, 4, 5, 6, 7, 8, 9] cdns,num-lanes: description: - Number of DisplayPort lanes. + Number of lanes. $ref: /schemas/types.yaml#/definitions/uint32 - enum: [1, 2, 4] + enum: [1, 2, 3, 4] default: 4 cdns,ssc-mode: @@ -108,6 +111,7 @@ patternProperties: - resets - "#phy-cells" - cdns,phy-type + - cdns,num-lanes additionalProperties: false @@ -141,14 +145,50 @@ examples: clock-names = "refclk"; #address-cells = <1>; #size-cells = <0>; - phy@0 { - reg = <0>; - resets = <&phyrst 1>, <&phyrst 2>, - <&phyrst 3>, <&phyrst 4>; - #phy-cells = <0>; - cdns,phy-type = <PHY_TYPE_DP>; - cdns,num-lanes = <4>; - cdns,max-bit-rate = <8100>; + link@0 { + reg = <0>; + resets = <&phyrst 1>, <&phyrst 2>, + <&phyrst 3>, <&phyrst 4>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_DP>; + cdns,num-lanes = <4>; + cdns,max-bit-rate = <8100>; + }; + }; + }; + - | + #include <dt-bindings/phy/phy.h> + #include <dt-bindings/phy/phy-cadence-torrent.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + torrent-phy@f0fb500000 { + compatible = "cdns,torrent-phy"; + reg = <0xf0 0xfb500000 0x0 0x00100000>; + reg-names = "torrent_phy"; + resets = <&phyrst 0>, <&phyrst 1>; + clocks = <&ref_clk>; + clock-names = "refclk"; + #address-cells = <1>; + #size-cells = <0>; + link@0 { + reg = <0>; + resets = <&phyrst 2>, <&phyrst 3>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + cdns,num-lanes = <2>; + cdns,ssc-mode = <TORRENT_SERDES_NO_SSC>; + }; + + link@2 { + reg = <2>; + resets = <&phyrst 4>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_SGMII>; + cdns,num-lanes = <1>; + cdns,ssc-mode = <TORRENT_SERDES_NO_SSC>; }; }; }; -- 2.26.1
