This series adds initial support for latest new SoC, J7200, from Texas Instruments. The J7200 SoC is a part of the K3 Multicore SoC architecture platform. It is targeted for for automotive gateway, vehicle compute systems, Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications. The SoC aims to meet the complex processing needs of modern embedded products. See J7200 Technical Reference Manual (SPRUIU1, June 2020) for further details: https://www.ti.com/lit/pdf/spruiu1 Changes since v1: - Swapped Patch 1 and 2 as suggested by Nishanth. - Added description for each SoC in yaml bindings. Testing: - ./scripts/checkpatch --strict - Few warningns about Line length exceeding 100 columns. But these are corresponding to comments - v8make dtbs_check - DT_SCHEMA_FLAGS="-u" DT_SCHEMA_FILES="Documentation/devicetree/bindings/arm/ti/k3.yaml" v8make dtbs_check - DT_SCHEMA_FLAGS="-u" DT_SCHEMA_FILES="Documentation/devicetree/bindings/arm/ti/k3.yaml" v8make dt_binding_check Lokesh Vutla (4): dt-bindings: arm: ti: Convert K3 board/soc bindings to DT schema dt-bindings: arm: ti: Add bindings for J7200 SoC arm64: dts: ti: Add support for J7200 SoC arm64: dts: ti: Add support for J7200 Common Processor Board .../devicetree/bindings/arm/ti/k3.txt | 26 --- .../devicetree/bindings/arm/ti/k3.yaml | 35 +++ MAINTAINERS | 2 +- arch/arm64/boot/dts/ti/Makefile | 3 +- .../dts/ti/k3-j7200-common-proc-board.dts | 64 ++++++ arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 199 ++++++++++++++++++ .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 84 ++++++++ arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 29 +++ arch/arm64/boot/dts/ti/k3-j7200.dtsi | 165 +++++++++++++++ 9 files changed, 579 insertions(+), 28 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/ti/k3.txt create mode 100644 Documentation/devicetree/bindings/arm/ti/k3.yaml create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j7200.dtsi -- 2.28.0
