Re: [PATCH v8 5/5] remoteproc: Add initial zynqmp R5 remoteproc driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Ben,

On Mon, Aug 10, 2020 at 08:32:13PM -0700, Ben Levinsky wrote:
> +/**
> + * zynqmp_r5_release() - ZynqMP R5 device release function
> + * @dev: pointer to the device struct of ZynqMP R5
> + *
> + * Function to release ZynqMP R5 device.
> + */
> +static void zynqmp_r5_release(struct device *dev)
> +{
> +	struct zynqmp_r5_pdata *pdata;
> +	struct rproc *rproc;
> +	struct sk_buff *skb;
> +
> +	pdata = dev_get_drvdata(dev);
> +	rproc = pdata->rproc;
> +	if (rproc) {
> +		rproc_del(rproc);
> +		rproc_free(rproc);
> +	}
> +	if (pdata->tx_chan)
> +		mbox_free_channel(pdata->tx_chan);
> +	if (pdata->rx_chan)
> +		mbox_free_channel(pdata->rx_chan);
> +	/* Discard all SKBs */
> +	while (!skb_queue_empty(&pdata->tx_mc_skbs)) {
> +		skb = skb_dequeue(&pdata->tx_mc_skbs);
> +		kfree_skb(skb);

In the event that zynqmp_r5_probe() fails before zynqmp_r5_setup_mbox()
has run, this will be called on an uninitialized skb_queue. (Also
obviously an issue once mailboxes are made optional again).

> +	}
> +
> +	put_device(dev->parent);
> +}
> +
> +/**
> + * event_notified_idr_cb() - event notified idr callback
> + * @id: idr id
> + * @ptr: pointer to idr private data
> + * @data: data passed to idr_for_each callback
> + *
> + * Pass notification to remoteproc virtio
> + *
> + * Return: 0. having return is to satisfy the idr_for_each() function
> + *          pointer input argument requirement.
> + **/
> +static int event_notified_idr_cb(int id, void *ptr, void *data)
> +{
> +	struct rproc *rproc = data;
> +
> +	(void)rproc_vq_interrupt(rproc, id);
> +	return 0;
> +}
> +
> +/**
> + * handle_event_notified() - remoteproc notification work funciton
> + * @work: pointer to the work structure
> + *
> + * It checks each registered remoteproc notify IDs.
> + */
> +static void handle_event_notified(struct work_struct *work)
> +{
> +	struct rproc *rproc;
> +	struct zynqmp_r5_pdata *pdata;
> +
> +	pdata = container_of(work, struct zynqmp_r5_pdata, mbox_work);
> +
> +	(void)mbox_send_message(pdata->rx_chan, NULL);
> +	rproc = pdata->rproc;
> +	/*
> +	 * We only use IPI for interrupt. The firmware side may or may
> +	 * not write the notifyid when it trigger IPI.
> +	 * And thus, we scan through all the registered notifyids.
> +	 */
> +	idr_for_each(&rproc->notifyids, event_notified_idr_cb, rproc);
> +}
> +
> +/**
> + * zynqmp_r5_mb_rx_cb() - Receive channel mailbox callback
> + * @cl: mailbox client
> + * @mssg: message pointer
> + *
> + * It will schedule the R5 notification work.
> + */
> +static void zynqmp_r5_mb_rx_cb(struct mbox_client *cl, void *mssg)
> +{
> +	struct zynqmp_r5_pdata *pdata;
> +
> +	pdata = container_of(cl, struct zynqmp_r5_pdata, rx_mc);
> +	if (mssg) {
> +		struct zynqmp_ipi_message *ipi_msg, *buf_msg;
> +		size_t len;
> +
> +		ipi_msg = (struct zynqmp_ipi_message *)mssg;
> +		buf_msg = (struct zynqmp_ipi_message *)pdata->rx_mc_buf;
> +		len = (ipi_msg->len >= IPI_BUF_LEN_MAX) ?
> +		      IPI_BUF_LEN_MAX : ipi_msg->len;
> +		buf_msg->len = len;
> +		memcpy(buf_msg->data, ipi_msg->data, len);
> +	}
> +	schedule_work(&pdata->mbox_work);
> +}
> +
> +/**
> + * zynqmp_r5_mb_tx_done() - Request has been sent to the remote
> + * @cl: mailbox client
> + * @mssg: pointer to the message which has been sent
> + * @r: status of last TX - OK or error
> + *
> + * It will be called by the mailbox framework when the last TX has done.
> + */
> +static void zynqmp_r5_mb_tx_done(struct mbox_client *cl, void *mssg, int r)
> +{
> +	struct zynqmp_r5_pdata *pdata;
> +	struct sk_buff *skb;
> +
> +	if (!mssg)
> +		return;
> +	pdata = container_of(cl, struct zynqmp_r5_pdata, tx_mc);
> +	skb = skb_dequeue(&pdata->tx_mc_skbs);
> +	kfree_skb(skb);
> +}
> +
> +/**
> + * zynqmp_r5_setup_mbox() - Setup mailboxes
> + *
> + * @pdata: pointer to the ZynqMP R5 processor platform data
> + * @node: pointer of the device node
> + *
> + * Function to setup mailboxes to talk to RPU.
> + *
> + * Return: 0 for success, negative value for failure.
> + */
> +static int zynqmp_r5_setup_mbox(struct zynqmp_r5_pdata *pdata,
> +				struct device_node *node)
> +{
> +	struct device *dev = &pdata->dev;
> +	struct mbox_client *mclient;
> +
> +	/* Setup TX mailbox channel client */
> +	mclient = &pdata->tx_mc;
> +	mclient->dev = dev;
> +	mclient->rx_callback = NULL;
> +	mclient->tx_block = false;
> +	mclient->knows_txdone = false;
> +	mclient->tx_done = zynqmp_r5_mb_tx_done;
> +
> +	/* Setup TX mailbox channel client */
> +	mclient = &pdata->rx_mc;
> +	mclient->dev = dev;
> +	mclient->rx_callback = zynqmp_r5_mb_rx_cb;
> +	mclient->tx_block = false;
> +	mclient->knows_txdone = false;
> +
> +	INIT_WORK(&pdata->mbox_work, handle_event_notified);
> +
> +	/* Request TX and RX channels */
> +	pdata->tx_chan = mbox_request_channel_byname(&pdata->tx_mc, "tx");
> +	if (IS_ERR(pdata->tx_chan)) {
> +		dev_err(dev, "failed to request mbox tx channel.\n");
> +		pdata->tx_chan = NULL;
> +		return -EINVAL;
> +	}
> +	pdata->rx_chan = mbox_request_channel_byname(&pdata->rx_mc, "rx");
> +	if (IS_ERR(pdata->rx_chan)) {
> +		dev_err(dev, "failed to request mbox rx channel.\n");
> +		pdata->rx_chan = NULL;
> +		return -EINVAL;
> +	}
> +	skb_queue_head_init(&pdata->tx_mc_skbs);
> +	return 0;
> +}
> +
> +/**
> + * zynqmp_r5_probe() - Probes ZynqMP R5 processor device node
> + * @pdata: pointer to the ZynqMP R5 processor platform data
> + * @pdev: parent RPU domain platform device
> + * @node: pointer of the device node
> + *
> + * Function to retrieve the information of the ZynqMP R5 device node.
> + *
> + * Return: 0 for success, negative value for failure.
> + */
> +static int zynqmp_r5_probe(struct zynqmp_r5_pdata *pdata,
> +			   struct platform_device *pdev,
> +			   struct device_node *node)
> +{
> +	struct device *dev = &pdata->dev;
> +	struct rproc *rproc;
> +	struct device_node *nc;
> +	int ret;
> +
> +	/* Create device for ZynqMP R5 device */
> +	dev->parent = &pdev->dev;
> +	dev->release = zynqmp_r5_release;
> +	dev->of_node = node;
> +	dev_set_name(dev, "%s", of_node_full_name(node));
> +	dev_set_drvdata(dev, pdata);
> +	ret = device_register(dev);
> +	if (ret) {
> +		dev_err(dev, "failed to register device.\n");
> +		return ret;
> +	}
> +	get_device(&pdev->dev);
> +
> +	/* Allocate remoteproc instance */
> +	rproc = rproc_alloc(dev, dev_name(dev), &zynqmp_r5_rproc_ops, NULL, 0);
> +	if (!rproc) {
> +		dev_err(dev, "rproc allocation failed.\n");
> +		ret = -ENOMEM;
> +		goto error;
> +	}
> +	rproc->auto_boot = autoboot;
> +	pdata->rproc = rproc;
> +	rproc->priv = pdata;
> +
> +	/*
> +	 * The device has not been spawned from a device tree, so
> +	 * arch_setup_dma_ops has not been called, thus leaving
> +	 * the device with dummy DMA ops.
> +	 * Fix this by inheriting the parent's DMA ops and mask.
> +	 */
> +	rproc->dev.dma_mask = pdev->dev.dma_mask;
> +	set_dma_ops(&rproc->dev, get_dma_ops(&pdev->dev));
> +
> +	/* Probe R5 memory devices */
> +	INIT_LIST_HEAD(&pdata->mems);
> +	for_each_available_child_of_node(node, nc) {
> +		ret = zynqmp_r5_mem_probe(pdata, nc);
> +		if (ret) {
> +			dev_err(dev, "failed to probe memory %s.\n",
> +				of_node_full_name(nc));
> +			goto error;
> +		}
> +	}
> +
> +	/* Set up DMA mask */
> +	ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
> +	if (ret) {
> +		dev_warn(dev, "dma_set_coherent_mask failed: %d\n", ret);
> +		/* If DMA is not configured yet, try to configure it. */
> +		ret = of_dma_configure(dev, node, true);
> +		if (ret) {
> +			dev_err(dev, "failed to configure DMA.\n");
> +			goto error;
> +		}
> +	}
> +
> +	/* Get R5 power domain node */
> +	ret = of_property_read_u32(node, "pnode-id", &pdata->pnode_id);
> +	if (ret) {
> +		dev_err(dev, "failed to get power node id.\n");
> +		goto error;
> +	}
> +
> +	/* TODO Check if R5 is running */
> +
> +	/* Set up R5 if not already setup */
> +	ret = pdata->is_r5_mode_set ? 0 : r5_set_mode(pdata);
> +	if (ret) {
> +		dev_err(dev, "failed to set R5 operation mode.\n");
> +		return ret;
> +	}
> +
> +	if (!of_get_property(dev->of_node, "mboxes", NULL)) {
> +		dev_dbg(dev, "no mailboxes.\n");
> +		goto error;
> +	} else {
> +		ret = zynqmp_r5_setup_mbox(pdata, node);
> +		if (ret < 0)
> +			goto error;
> +	}
> +
> +	/* Add R5 remoteproc */
> +	ret = rproc_add(rproc);
> +	if (ret) {
> +		dev_err(dev, "rproc registration failed\n");
> +		goto error;
> +	}
> +	return 0;
> +error:
> +	if (pdata->rproc)
> +		rproc_free(pdata->rproc);
> +	pdata->rproc = NULL;
> +	device_unregister(dev);
> +	put_device(&pdev->dev);
> +	return ret;
> +}
> +
> +static int zynqmp_r5_remoteproc_probe(struct platform_device *pdev)
> +{
> +	int ret, i = 0;
> +	u32 *lockstep_mode;
> +	struct device *dev = &pdev->dev;
> +	struct device_node *nc;
> +	struct zynqmp_r5_pdata *pdata;
> +
> +	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> +	lockstep_mode = devm_kzalloc(dev, sizeof(u32 *), GFP_KERNEL);
> +	if (!pdata || !lockstep_mode)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, pdata);
> +
> +	of_property_read_u32(dev->of_node, "lockstep-mode", lockstep_mode);
> +
> +	if (!(*lockstep_mode)) {
> +		rpu_mode = PM_RPU_MODE_SPLIT;
> +	} else if (*lockstep_mode == 1) {
> +		rpu_mode = PM_RPU_MODE_LOCKSTEP;
> +	} else {
> +		dev_err(dev,
> +			"Invalid lockstep-mode mode provided - %x %d\n",
> +			*lockstep_mode, rpu_mode);
> +		return -EINVAL;
> +	}
> +	dev_dbg(dev, "RPU configuration: %s\r\n",
> +		(*lockstep_mode) ? "lockstep" : "split");
> +
> +	for_each_available_child_of_node(dev->of_node, nc) {
> +		ret = zynqmp_r5_probe(&rpus[i], pdev, nc);
> +		if (ret) {
> +			dev_err(dev, "failed to probe rpu %s.\n",
> +				of_node_full_name(nc));
> +			return ret;
> +		}
> +		i++;
> +	}
> +
> +	return 0;
> +}
> +
> +static int zynqmp_r5_remoteproc_remove(struct platform_device *pdev)
> +{
> +	int i;
> +
> +	for (i = 0; i < MAX_RPROCS; i++) {
> +		struct zynqmp_r5_pdata *pdata = &rpus[i];
> +		struct rproc *rproc;
> +
> +		rproc = pdata->rproc;
> +		if (rproc) {
> +			rproc_del(rproc);
> +			rproc_free(rproc);
> +			pdata->rproc = NULL;
> +		}
> +		if (pdata->tx_chan) {
> +			mbox_free_channel(pdata->tx_chan);
> +			pdata->tx_chan = NULL;
> +		}
> +		if (pdata->rx_chan) {
> +			mbox_free_channel(pdata->rx_chan);
> +			pdata->rx_chan = NULL;
> +		}
> +
> +		device_unregister(&pdata->dev);
> +	}
> +
> +	return 0;
> +}
> +
> +/* Match table for OF platform binding */
> +static const struct of_device_id zynqmp_r5_remoteproc_match[] = {
> +	{ .compatible = "xlnx,zynqmp-r5-remoteproc-1.0", },
> +	{ /* end of list */ },
> +};
> +MODULE_DEVICE_TABLE(of, zynqmp_r5_remoteproc_match);
> +
> +static struct platform_driver zynqmp_r5_remoteproc_driver = {
> +	.probe = zynqmp_r5_remoteproc_probe,
> +	.remove = zynqmp_r5_remoteproc_remove,
> +	.driver = {
> +		.name = "zynqmp_r5_remoteproc",
> +		.of_match_table = zynqmp_r5_remoteproc_match,
> +	},
> +};
> +module_platform_driver(zynqmp_r5_remoteproc_driver);
> +
> +module_param_named(autoboot,  autoboot, bool, 0444);
> +MODULE_PARM_DESC(autoboot,
> +		 "enable | disable autoboot. (default: false)");
> +
> +MODULE_AUTHOR("Ben Levinsky <ben.levinsky@xxxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> -- 
> 2.17.1
> 

Thanks,
 Michael



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux