Re: [PATCH] dt-bindings: media: imx214: Convert to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Aug 19, 2020 at 04:28:23PM +0300, Laurent Pinchart wrote:
> Hi Jacopo,
> 
> Thank you for the patch.
> 
> On Tue, Aug 18, 2020 at 02:17:55PM +0200, Jacopo Mondi wrote:
> > Convert the imx214 bindings document to json-schema and update
> > the MAINTAINERS file accordingly.
> > 
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > ---
> >  .../bindings/media/i2c/sony,imx214.txt        |  53 --------
> >  .../bindings/media/i2c/sony,imx214.yaml       | 124 ++++++++++++++++++
> >  MAINTAINERS                                   |   2 +-
> >  3 files changed, 125 insertions(+), 54 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
> >  create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt b/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
> > deleted file mode 100644
> > index f11f28a5fda4..000000000000
> > --- a/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
> > +++ /dev/null
> > @@ -1,53 +0,0 @@
> > -* Sony 1/3.06-Inch 13.13Mp CMOS Digital Image Sensor
> > -
> > -The Sony imx214 is a 1/3.06-inch CMOS active pixel digital image sensor with
> > -an active array size of 4224H x 3200V. It is programmable through an I2C
> > -interface.
> > -Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a maximum
> > -throughput of 1.2Gbps/lane.
> > -
> > -
> > -Required Properties:
> > -- compatible: Shall be "sony,imx214".
> > -- reg: I2C bus address of the device. Depending on how the sensor is wired,
> > -       it shall be <0x10> or <0x1a>;
> > -- enable-gpios: GPIO descriptor for the enable pin.
> > -- vdddo-supply: Chip digital IO regulator (1.8V).
> > -- vdda-supply: Chip analog regulator (2.7V).
> > -- vddd-supply: Chip digital core regulator (1.12V).
> > -- clocks: Reference to the xclk clock.
> > -- clock-frequency: Frequency of the xclk clock.
> > -
> > -Optional Properties:
> > -- flash-leds: See ../video-interfaces.txt
> > -- lens-focus: See ../video-interfaces.txt
> > -
> > -The imx214 device node shall contain one 'port' child node with
> > -an 'endpoint' subnode. For further reading on port node refer to
> > -Documentation/devicetree/bindings/media/video-interfaces.txt.
> > -
> > -Required Properties on endpoint:
> > -- data-lanes: check ../video-interfaces.txt
> > -- link-frequencies: check ../video-interfaces.txt
> > -- remote-endpoint: check ../video-interfaces.txt
> > -
> > -Example:
> > -
> > -	camera-sensor@1a {
> > -		compatible = "sony,imx214";
> > -		reg = <0x1a>;
> > -		vdddo-supply = <&pm8994_lvs1>;
> > -		vddd-supply = <&camera_vddd_1v12>;
> > -		vdda-supply = <&pm8994_l17>;
> > -		lens-focus = <&ad5820>;
> > -		enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
> > -		clocks = <&mmcc CAMSS_MCLK0_CLK>;
> > -		clock-frequency = <24000000>;
> > -		port {
> > -			imx214_ep: endpoint {
> > -				data-lanes = <1 2 3 4>;
> > -				link-frequencies = /bits/ 64 <480000000>;
> > -				remote-endpoint = <&csiphy0_ep>;
> > -			};
> > -		};
> > -	};
> > diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
> > new file mode 100644
> > index 000000000000..ddd4627214b1
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
> > @@ -0,0 +1,124 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/i2c/sony,imx214.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Sony 1/3.06-Inch 13.13Mp CMOS Digital Image Sensor
> 
> s/Mp/MP/
> 
> > +
> > +maintainers:
> > +  - Ricardo Ribalda <ribalda@xxxxxxxxxx>
> > +
> > +description: -|
> > +  The Sony imx214 is a 1/3.06-inch CMOS active pixel digital image sensor with
> 
> s/imx214/IMX214/
> 
> > +  an active array size of 4224H x 3200V. It is programmable through an I2C
> > +  interface.  Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a
> 
> s/  Image/ Image/
> 
> > +  maximum throughput of 1.2Gbps/lane.
> > +
> > +properties:
> > +  compatible:
> > +    const: sony,imx214
> > +
> > +  reg:
> > +    description: -|
> > +      I2C device address. Depends on how the sensor is wired.
> 
> I'd drop the description, it's fairly evident as it's an I2C device,
> isn't it ?
> 
> > +    enum:
> > +      - 0x10
> > +      - 0x1a
> > +
> > +  clocks:
> > +    description: Reference to the xclk clock.
> > +    maxItems: 1
> > +
> > +  clock-frequency:
> > +    description: Frequency of the xclk clock in Hz.
> > +
> > +  enable-gpios:
> > +    description: GPIO descriptor for the enable pin.
> > +    maxItems: 1
> > +
> > +  vdddo-supply:
> > +    description: Chip digital IO regulator (1.8V).
> > +    maxItems: 1
> > +
> > +  vdda-supply:
> > +    description: Chip analog regulator (2.7V).
> > +    maxItems: 1
> > +
> > +  vddd-supply:
> > +    description: Chip digital core regulator (1.12V).
> > +    maxItems: 1
> > +
> > +  flash-leds:
> > +    description: See ../video-interfaces.txt
> > +
> > +  lens-focus:
> > +    description: See ../video-interfaces.txt
> > +
> > +  port:
> > +    type: object
> > +    description: |
> > +      The device node must contain one 'port' child node for its digital output
> > +      video port, in accordance with the video interface bindings defined in
> > +      Documentation/devicetree/bindings/media/video-interfaces.txt.
> 
> I'd drop this, the port node is already described as required below.
> 
> > +
> > +    properties:
> > +      endpoint:
> > +        type: object
> > +        properties:
> > +          remote-endpoint:
> > +            description: See ../video-interfaces.txt
> > +
> > +          data-lanes:
> > +            description: See ../video-interfaces.txt
> 
> Shouldn't this also express that only 2 or 4 data lanes are allowed ?
> 
>             $ref: /schemas/types.yaml#/definitions/uint32-array
>             description: See ../video-interfaces.txt
>             anyOf:
>               - items:
>                   - const: 1
>                   - const: 2
>               - items:
>                   - const: 1
>                   - const: 2
>                   - const: 3
>                   - const: 4
> 
> Maybe someone more experienced with YAML schemas could propose a better
> way to express this ? I initially tried to express it with enum instead
> of anyOf but couldn't get it to work.

There's different ways with minItems/maxItems, but that still uses 
anyOf and doesn't end up being any better.

Rob



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux