Controller version 0x0002450D has USB2 PHY RX sensitivity issues that needs to be worked around by enabling phyrst-a-enable bit in PHYRST_CFG register. There is no way to distinguish between the controller version before the device controller is started so we need to add this DT property. Signed-off-by: Roger Quadros <rogerq@xxxxxx> --- Documentation/devicetree/bindings/usb/cdns,usb3.yaml | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml index 7bc0263accee..e670adc955e1 100644 --- a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml +++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml @@ -58,6 +58,10 @@ properties: buffers expressed in KB $ref: /schemas/types.yaml#/definitions/uint32 + cdns,phyrst-a-enable: + description: Enable resetting of PHY if Rx fail is detected + type: boolean + required: - compatible - reg -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki