Re: [PATCH v4 7/7] sdhci: tegra: Add missing TMCLK for data timeout

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 24/08/2020 20:15, Sowjanya Komatineni wrote:
> commit b5a84ecf025a ("mmc: tegra: Add Tegra210 support")
> 
> Tegra210 and later has a separate sdmmc_legacy_tm (TMCLK) used by Tegra
> SDMMC hawdware for data timeout to achive better timeout than using
> SDCLK and using TMCLK is recommended.
> 
> USE_TMCLK_FOR_DATA_TIMEOUT bit in Tegra SDMMC register
> SDHCI_TEGRA_VENDOR_SYS_SW_CTRL can be used to choose either TMCLK or
> SDCLK for data timeout.
> 
> Default USE_TMCLK_FOR_DATA_TIMEOUT bit is set to 1 and TMCLK is used
> for data timeout by Tegra SDMMC hardware and having TMCLK not enabled
> is not recommended.
> 
> So, this patch fixes it.
> 
> Fixes: b5a84ecf025a ("mmc: tegra: Add Tegra210 support")
> Cc: stable <stable@xxxxxxxxxxxxxxx> # 5.4
> Tested-by: Jon Hunter <jonathanh@xxxxxxxxxx>
> Reviewed-by: Jon Hunter <jonathanh@xxxxxxxxxx>
> Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
> Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
> ---
>  drivers/mmc/host/sdhci-tegra.c | 41 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
> 
> diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
> index 31ed321..c0b9405 100644
> --- a/drivers/mmc/host/sdhci-tegra.c
> +++ b/drivers/mmc/host/sdhci-tegra.c
> @@ -140,6 +140,7 @@ struct sdhci_tegra_autocal_offsets {
>  struct sdhci_tegra {
>  	const struct sdhci_tegra_soc_data *soc_data;
>  	struct gpio_desc *power_gpio;
> +	struct clk *tmclk;
>  	bool ddr_signaling;
>  	bool pad_calib_required;
>  	bool pad_control_available;
> @@ -1611,6 +1612,44 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
>  		goto err_power_req;
>  	}
>  
> +	/*
> +	 * Tegra210 has a separate SDMMC_LEGACY_TM clock used for host
> +	 * timeout clock and SW can choose TMCLK or SDCLK for hardware
> +	 * data timeout through the bit USE_TMCLK_FOR_DATA_TIMEOUT of
> +	 * the register SDHCI_TEGRA_VENDOR_SYS_SW_CTRL.
> +	 *
> +	 * USE_TMCLK_FOR_DATA_TIMEOUT bit default is set to 1 and SDMMC uses
> +	 * 12Mhz TMCLK which is advertised in host capability register.
> +	 * With TMCLK of 12Mhz provides maximum data timeout period that can
> +	 * be achieved is 11s better than using SDCLK for data timeout.
> +	 *
> +	 * So, TMCLK is set to 12Mhz and kept enabled all the time on SoC's
> +	 * supporting SDR104 mode and when not using SDCLK for data timeout.
> +	 */
> +
> +	if ((soc_data->nvquirks & NVQUIRK_ENABLE_SDR104) &&
> +	    !(soc_data->pdata->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
> +		clk = devm_clk_get(&pdev->dev, "tmclk");
> +		if (IS_ERR(clk)) {
> +			rc = PTR_ERR(clk);
> +			if (rc == -EPROBE_DEFER)
> +				goto err_power_req;
> +
> +			dev_warn(&pdev->dev, "failed to get tmclk: %d\n", rc);
> +			clk = NULL;
> +		}
> +
> +		clk_set_rate(clk, 12000000);
> +		rc = clk_prepare_enable(clk);
> +		if (rc) {
> +			dev_err(&pdev->dev,
> +				"failed to enable tmclk: %d\n", rc);
> +			goto err_power_req;
> +		}
> +
> +		tegra_host->tmclk = clk;
> +	}
> +
>  	clk = devm_clk_get(mmc_dev(host->mmc), NULL);


One thing that I just thought of is that now we may have two clocks,
shouldn't we use the name, 'sdhci', for requesting the above clock as well?

Unfortunately, the name 'sdhci' has not been populated for all Tegra
devices until recently and so we may need to check if there are one of
two clocks populated. If there is only one, then maybe we fall back to
the above.

Cheers
Jon

-- 
nvpublic



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux