[PATCH 09/16] arm64: dts: imx8mn-evk: Align pin configuration group names with schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Device tree schema expects pin configuration groups to end with 'grp'
suffix, otherwise dtbs_check complain with a warning like:

    ... do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index 48892ed562b4..ed9b5241acc7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -221,13 +221,13 @@
 		>;
 	};
 
-	pinctrl_pmic: pmicirq {
+	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
 		>;
 	};
 
-	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
 		>;
@@ -246,7 +246,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_gpio: usdhc2grpgpio {
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x1c4
 		>;
@@ -264,7 +264,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
 			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
@@ -276,7 +276,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
 			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
@@ -304,7 +304,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000194
 			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
@@ -320,7 +320,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000196
 			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux