Since the "spi-cs-high" property is not present, the SPI chip select pin
polarity is active low.
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
index bf0859f1e1fa..5b5af8b381df 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -70,7 +70,7 @@
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_espi2>;
- cs-gpios = <&gpio5 9 0>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
status = "okay";
eeprom@0 {
--
2.17.1
