Re: [PATCH v3 5/7] ravb: Add support for explicit internal clock delay configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 8/19/20 6:43 AM, Geert Uytterhoeven wrote:
> Some EtherAVB variants support internal clock delay configuration, which
> can add larger delays than the delays that are typically supported by
> the PHY (using an "rgmii-*id" PHY mode, and/or "[rt]xc-skew-ps"
> properties).
> 
> Historically, the EtherAVB driver configured these delays based on the
> "rgmii-*id" PHY mode.  This caused issues with PHY drivers that
> implement PHY internal delays properly[1].  Hence a backwards-compatible
> workaround was added by masking the PHY mode[2].
> 
> Add proper support for explicit configuration of the MAC internal clock
> delays using the new "[rt]x-internal-delay-ps" properties.
> Fall back to the old handling if none of these properties is present.
> 
> [1] Commit bcf3440c6dd78bfe ("net: phy: micrel: add phy-mode support for
>     the KSZ9031 PHY")
> [2] Commit 9b23203c32ee02cd ("ravb: Mask PHY mode to avoid inserting
>     delays twice").
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>

Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
-- 
Florian



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux