Move connector node out of hd3ss3220 device in order to comply with usb connector bindings. Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> --- v2->v3: No change v1->v2: No change --- .../boot/dts/renesas/r8a774c0-cat874.dts | 67 ++++++++++++++----- 1 file changed, 50 insertions(+), 17 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts index 26aee004a44e..ea87cb5a459c 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts +++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts @@ -129,6 +129,29 @@ #clock-cells = <0>; clock-frequency = <74250000>; }; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hs_ep: endpoint { + remote-endpoint = <&usb3_hs_ep>; + }; + }; + port@1 { + reg = <1>; + ss_ep: endpoint { + remote-endpoint = <&hd3ss3220_in_ep>; + }; + }; + }; + }; }; &audio_clk_a { @@ -186,20 +209,19 @@ interrupt-parent = <&gpio6>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - connector { - compatible = "usb-c-connector"; - label = "USB-C"; - data-role = "dual"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - hd3ss3220_ep: endpoint { - remote-endpoint = <&usb3_role_switch>; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hd3ss3220_in_ep: endpoint { + remote-endpoint = <&ss_ep>; + }; + }; + port@1 { + reg = <1>; + hd3ss3220_out_ep: endpoint { + remote-endpoint = <&usb3_role_switch>; }; }; }; @@ -405,9 +427,20 @@ status = "okay"; usb-role-switch; - port { - usb3_role_switch: endpoint { - remote-endpoint = <&hd3ss3220_ep>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + usb3_hs_ep: endpoint { + remote-endpoint = <&hs_ep>; + }; + }; + port@1 { + reg = <1>; + usb3_role_switch: endpoint { + remote-endpoint = <&hd3ss3220_out_ep>; + }; }; }; }; -- 2.17.1