Hi,
On Sun, Aug 23, 2020 at 05:08:42PM +0300, Dmitry Osipenko wrote:
> This patch adds battery gauge driver for Acer Iconia Tab A500 device.
> The battery gauge function is provided via the Embedded Controller,
> which is found on the Acer A500.
>
> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
> ---
> drivers/power/supply/Kconfig | 6 +
> drivers/power/supply/Makefile | 1 +
> drivers/power/supply/acer_a500_battery.c | 369 +++++++++++++++++++++++
> 3 files changed, 376 insertions(+)
> create mode 100644 drivers/power/supply/acer_a500_battery.c
>
> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> index faf2830aa152..dff5e5a7383f 100644
> --- a/drivers/power/supply/Kconfig
> +++ b/drivers/power/supply/Kconfig
> @@ -752,4 +752,10 @@ config CHARGER_WILCO
> information can be found in
> Documentation/ABI/testing/sysfs-class-power-wilco
>
> +config BATTERY_ACER_A500
> + tristate "Acer Iconia Tab A500 battery driver"
> + depends on MFD_ACER_A500_EC
> + help
> + Say Y to include support for Acer Iconia Tab A500 battery fuel gauge.
> +
> endif # POWER_SUPPLY
> diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
> index b3c694a65114..08a5b49e2936 100644
> --- a/drivers/power/supply/Makefile
> +++ b/drivers/power/supply/Makefile
> @@ -96,3 +96,4 @@ obj-$(CONFIG_CHARGER_UCS1002) += ucs1002_power.o
> obj-$(CONFIG_CHARGER_BD70528) += bd70528-charger.o
> obj-$(CONFIG_CHARGER_BD99954) += bd99954-charger.o
> obj-$(CONFIG_CHARGER_WILCO) += wilco-charger.o
> +obj-$(CONFIG_BATTERY_ACER_A500) += acer_a500_battery.o
> diff --git a/drivers/power/supply/acer_a500_battery.c b/drivers/power/supply/acer_a500_battery.c
> new file mode 100644
> index 000000000000..933101e1261e
> --- /dev/null
> +++ b/drivers/power/supply/acer_a500_battery.c
> @@ -0,0 +1,369 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Battery driver for Acer Iconia Tab A500.
> + *
> + * Copyright 2020 GRATE-driver project.
> + *
> + * Based on downstream driver from Acer Inc.
> + * Based on NVIDIA Gas Gauge driver for SBS Compliant Batteries.
> + *
> + * Copyright (c) 2010, NVIDIA Corporation.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/power_supply.h>
> +#include <linux/sched.h>
> +#include <linux/slab.h>
> +#include <linux/workqueue.h>
> +
> +#include <linux/mfd/acer-ec-a500.h>
> +
> +#define BATTERY_SERIAL_LEN 22
> +
> +enum {
> + REG_CAPACITY,
> + REG_VOLTAGE,
> + REG_CURRENT,
> + REG_DESIGN_CAPACITY,
> + REG_TEMPERATURE,
> + REG_SERIAL_NUMBER,
> +};
> +
> +#define EC_DATA(_cmd, _delay, _psp) { \
> + .psp = POWER_SUPPLY_PROP_ ## _psp, \
> + .cmd = { \
> + .cmd = _cmd, \
> + .post_delay = _delay \
> + }, \
> +}
> +
> +static const struct chip_data {
> + enum power_supply_property psp;
> + struct a500_ec_cmd cmd;
> +} ec_data[] = {
> + [REG_CAPACITY] = EC_DATA(0x00, 0, CAPACITY),
> + [REG_VOLTAGE] = EC_DATA(0x01, 0, VOLTAGE_NOW),
> + [REG_CURRENT] = EC_DATA(0x03, 10, CURRENT_NOW),
> + [REG_DESIGN_CAPACITY] = EC_DATA(0x08, 0, CHARGE_FULL_DESIGN),
> + [REG_TEMPERATURE] = EC_DATA(0x0a, 0, TEMP),
> + [REG_SERIAL_NUMBER] = EC_DATA(0x6a, 0, SERIAL_NUMBER),
> +};
> +
> +static const enum power_supply_property a500_battery_properties[] = {
> + POWER_SUPPLY_PROP_CAPACITY,
> + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
> + POWER_SUPPLY_PROP_CURRENT_NOW,
> + POWER_SUPPLY_PROP_PRESENT,
> + POWER_SUPPLY_PROP_SERIAL_NUMBER,
> + POWER_SUPPLY_PROP_STATUS,
> + POWER_SUPPLY_PROP_TECHNOLOGY,
> + POWER_SUPPLY_PROP_TEMP,
> + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> +};
> +
> +struct a500_battery {
> + struct delayed_work poll_work;
> + struct power_supply *psy;
> + struct a500_ec *ec_chip;
> + unsigned int capacity;
> + char serial[BATTERY_SERIAL_LEN + 1];
> +};
> +
> +static int a500_battery_get_presence(struct a500_battery *bat,
> + union power_supply_propval *val)
> +{
> + s32 ret;
> +
> + /*
> + * DESIGN_CAPACITY register always returns a non-zero value if
> + * battery is connected and zero if disconnected.
> + */
> + ret = a500_ec_read(bat->ec_chip, &ec_data[REG_DESIGN_CAPACITY].cmd);
> + if (ret <= 0)
> + val->intval = 0;
> + else
> + val->intval = 1;
> +
> + return 0;
> +}
> +
> +static bool a500_battery_update_capacity(struct a500_battery *bat)
> +{
> + unsigned int capacity;
> + s32 ret;
> +
> + ret = a500_ec_read(bat->ec_chip, &ec_data[REG_CAPACITY].cmd);
> + if (ret < 0)
> + return false;
> +
> + /* capacity can be >100% even if max value is 100% */
> + capacity = min(ret, 100);
> +
> + if (bat->capacity != capacity) {
> + bat->capacity = capacity;
> + return true;
> + }
> +
> + return false;
> +}
> +
> +static void a500_battery_get_status(struct a500_battery *bat,
> + union power_supply_propval *val)
> +{
> + if (bat->capacity < 100) {
> + if (power_supply_am_i_supplied(bat->psy))
> + val->intval = POWER_SUPPLY_STATUS_CHARGING;
> + else
> + val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
> + } else {
> + val->intval = POWER_SUPPLY_STATUS_FULL;
> + }
> +}
> +
> +static void a500_battery_unit_adjustment(struct device *dev,
> + enum power_supply_property psp,
> + union power_supply_propval *val)
> +{
> + const unsigned int base_unit_conversion = 1000;
> + const unsigned int temp_kelvin_to_celsius = 2731;
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
> + case POWER_SUPPLY_PROP_CURRENT_NOW:
> + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> + val->intval *= base_unit_conversion;
> + break;
> +
> + case POWER_SUPPLY_PROP_TEMP:
> + val->intval -= temp_kelvin_to_celsius;
> + break;
> +
> + default:
> + dev_dbg(dev,
> + "%s: no need for unit conversion %d\n", __func__, psp);
> + }
> +}
> +
> +static int a500_battery_get_serial_number(struct a500_battery *bat,
> + union power_supply_propval *val)
> +{
> + unsigned int i;
> + s32 ret = 0;
> +
> + if (bat->serial[0])
> + goto done;
> +
> + a500_ec_lock(bat->ec_chip);
> + for (i = 0; i < BATTERY_SERIAL_LEN / 2; i++) {
> + ret = a500_ec_read_locked(bat->ec_chip,
> + &ec_data[REG_SERIAL_NUMBER].cmd);
> + if (ret < 0) {
> + bat->serial[0] = '\0';
> + break;
> + }
> +
> + bat->serial[i * 2 + 0] = (ret >> 0) & 0xff;
> + bat->serial[i * 2 + 1] = (ret >> 8) & 0xff;
> + }
> + a500_ec_unlock(bat->ec_chip);
> +done:
> + val->strval = bat->serial;
> +
> + return ret;
> +}
If battery is swapped, this will keep the old serial.
> +static int a500_battery_get_ec_data_index(struct device *dev,
> + enum power_supply_property psp)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(ec_data); i++)
> + if (psp == ec_data[i].psp)
> + return i;
> +
> + dev_dbg(dev, "%s: invalid property %u\n", __func__, psp);
> +
> + return -EINVAL;
> +}
> +
> +static int a500_battery_get_simple_property(struct a500_battery *bat,
> + union power_supply_propval *val,
> + unsigned int ec_idx)
> +{
> + s32 ret;
> +
> + ret = a500_ec_read(bat->ec_chip, &ec_data[ec_idx].cmd);
> + if (ret < 0)
> + return ret;
> +
> + val->intval = (u16)ret;
> +
> + return 0;
> +}
> +
> +static int a500_battery_get_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + union power_supply_propval *val)
> +{
> + struct a500_battery *bat = power_supply_get_drvdata(psy);
> + struct device *dev = psy->dev.parent;
> + int ret = 0;
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_SERIAL_NUMBER:
> + ret = a500_battery_get_serial_number(bat, val);
> + break;
> +
> + case POWER_SUPPLY_PROP_PRESENT:
> + ret = a500_battery_get_presence(bat, val);
> + break;
> +
> + case POWER_SUPPLY_PROP_STATUS:
> + a500_battery_get_status(bat, val);
> + break;
> +
> + case POWER_SUPPLY_PROP_TECHNOLOGY:
> + val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
> + break;
> +
> + case POWER_SUPPLY_PROP_CAPACITY:
> + a500_battery_update_capacity(bat);
> + val->intval = bat->capacity;
> + break;
> +
> + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
> + case POWER_SUPPLY_PROP_CURRENT_NOW:
> + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> + case POWER_SUPPLY_PROP_TEMP:
> + ret = a500_battery_get_ec_data_index(dev, psp);
> + if (ret < 0)
> + break;
> +
> + ret = a500_battery_get_simple_property(bat, val, ret);
> + break;
> +
> + default:
> + dev_err(dev, "%s: invalid property %u\n", __func__, psp);
> + return -EINVAL;
> + }
> +
> + if (!ret) {
> + /* convert units to match requirements for power supply class */
> + a500_battery_unit_adjustment(dev, psp, val);
> + }
> +
> + dev_dbg(dev, "%s: property = %d, value = %x\n",
> + __func__, psp, val->intval);
> +
> + /* return NODATA for properties if battery not presents */
> + if (ret)
> + return -ENODATA;
> +
> + return 0;
> +}
> +
> +static void a500_battery_delayed_work(struct work_struct *work)
> +{
> + struct a500_battery *bat;
> + bool capacity_changed;
> +
> + bat = container_of(work, struct a500_battery, poll_work.work);
> + capacity_changed = a500_battery_update_capacity(bat);
> +
> + if (capacity_changed)
> + power_supply_changed(bat->psy);
> +
> + /* continuously send uevent notification */
> + schedule_delayed_work(&bat->poll_work, 30 * HZ);
> +}
> +
> +static const struct power_supply_desc a500_battery_desc = {
> + .name = "ec-battery",
> + .type = POWER_SUPPLY_TYPE_BATTERY,
> + .properties = a500_battery_properties,
> + .get_property = a500_battery_get_property,
> + .num_properties = ARRAY_SIZE(a500_battery_properties),
> + .external_power_changed = power_supply_changed,
> +};
> +
> +static int a500_battery_probe(struct platform_device *pdev)
> +{
> + struct power_supply_config psy_cfg = {};
> + struct a500_battery *bat;
> + int err;
> +
> + bat = devm_kzalloc(&pdev->dev, sizeof(*bat), GFP_KERNEL);
> + if (!bat)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, bat);
> +
> + psy_cfg.of_node = pdev->dev.parent->of_node;
> + psy_cfg.drv_data = bat;
> +
> + bat->ec_chip = dev_get_drvdata(pdev->dev.parent);
> +
> + bat->psy = devm_power_supply_register_no_ws(&pdev->dev,
> + &a500_battery_desc,
> + &psy_cfg);
> + err = PTR_ERR_OR_ZERO(bat->psy);
> + if (err) {
> + if (err == -EPROBE_DEFER)
> + dev_dbg(&pdev->dev, "failed to register battery, deferring probe\n");
> + else
> + dev_err(&pdev->dev, "failed to register battery: %d\n",
> + err);
> + return err;
> + }
if (IS_ERR(bat->psy))
return dev_err_probe(&pdev->dev, PTR_ERR(err), "failed to register battery\n");
> +
> + INIT_DELAYED_WORK(&bat->poll_work, a500_battery_delayed_work);
> + schedule_delayed_work(&bat->poll_work, HZ);
> +
> + return 0;
> +}
> +
> +static int a500_battery_remove(struct platform_device *pdev)
> +{
> + struct a500_battery *bat = dev_get_drvdata(&pdev->dev);
> +
> + cancel_delayed_work_sync(&bat->poll_work);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused a500_battery_suspend(struct device *dev)
> +{
> + struct a500_battery *bat = dev_get_drvdata(dev);
> +
> + cancel_delayed_work_sync(&bat->poll_work);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused a500_battery_resume(struct device *dev)
> +{
> + struct a500_battery *bat = dev_get_drvdata(dev);
> +
> + schedule_delayed_work(&bat->poll_work, HZ);
> +
> + return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(a500_battery_pm_ops,
> + a500_battery_suspend, a500_battery_resume);
> +
> +static struct platform_driver a500_battery_driver = {
> + .driver = {
> + .name = "acer-a500-iconia-battery",
> + .pm = &a500_battery_pm_ops,
> + },
> + .probe = a500_battery_probe,
> + .remove = a500_battery_remove,
> +};
> +module_platform_driver(a500_battery_driver);
> +
> +MODULE_DESCRIPTION("Battery gauge driver for Acer Iconia Tab A500");
> +MODULE_AUTHOR("Dmitry Osipenko <digetx@xxxxxxxxx>");
> +MODULE_ALIAS("platform:acer-a500-iconia-battery");
> +MODULE_LICENSE("GPL v2");
MODULE_LICENSE("GPL");
Otherwise looks good to me.
-- Sebastian
Attachment:
signature.asc
Description: PGP signature
