Document dedicated Krait CPU Cache Scaling driver. Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx> --- .../bindings/cpufreq/krait-cache-scale.yaml | 79 +++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 Documentation/devicetree/bindings/cpufreq/krait-cache-scale.yaml diff --git a/Documentation/devicetree/bindings/cpufreq/krait-cache-scale.yaml b/Documentation/devicetree/bindings/cpufreq/krait-cache-scale.yaml new file mode 100644 index 000000000000..f5f1c9b76656 --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/krait-cache-scale.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/cpufreq/krait-cache-scale.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Krait Cpu Cache Frequency Scaling dedicated driver + +maintainers: + - Ansuel Smith <ansuelsmth@xxxxxxxxx> + +description: | + This Scale the Krait CPU Cache Frequency and optionally voltage + when the Cpu Frequency is changed (using the cpufreq notifier). + + Cache is scaled with the max frequency across all core and the cache + frequency will scale based on the configured threshold in the dts. + + The cache thresholds can be set to 3+ frequency bin, idle, nominal and + high. + +properties: + compatible: + const: qcom,krait-cache + + clocks: + $ref: "/schemas/types.yaml#/definitions/phandle" + description: Phandle to the L2 CPU clock + + clock-names: + const: "l2" + + voltage-tolerance: + description: Same voltage tollerance of the Krait CPU + + l2-cpufreq: + description: | + Threshold used by the driver to scale the L2 cache. + If the max CPU Frequency is more than the set frequency, + the driver will transition to the next frequency bin. + Value is in kHz + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + items: + - description: idle + - description: nominal + - description: high + + l2-supply: + $ref: "/schemas/types.yaml#/definitions/phandle" + description: Phandle to the L2 regulator supply. + + opp-table: true + +required: + - compatible + - clocks + - clock-names + - voltage-tolerance + - l2-cpufreq + - l2-supply + +examples: + - | + qcom-krait-cache { + compatible = "qcom,krait-cache"; + clocks = <&kraitcc 4>; + clock-names = "l2"; + voltage-tolerance = <5>; + l2-cpufreq = <384000 600000 1200000>; + l2-supply = <&smb208_s1a>; + + operating-points = < + /* kHz uV */ + 384000 1100000 + 1000000 1100000 + 1200000 1150000 + >; + }; -- 2.27.0
