Hi.
The first patch is new and added to rename rename
phy-intel-{combo,emmc}.c to phy-intel-lgm-{combo,emmc}.c..
The second patch is to document DT bindings for Keem Bay eMMC PHY.
The the third is the driver file, loosely based on phy-rockchip-emmc.c
and phy-intel-emmc.c. The latter is not being reused as there are
quite a number of differences i.e. registers offset, supported clock
rates, bitfield to set.
The patch was tested with Keem Bay evaluation module board.
Thank you.
Best regards,
Zainie
Changes since v6:
- Add new patch to rename phy-intel-{combo,emmc}.c to
phy-intel-lgm-{combo,emmc}.c.
- Add Reviewed-by: Rob Herring <robh@xxxxxxxxxx> tag to 2nd patch.
- In 3rd patch,
- add and use generic helper to update register bits,
- end module name with .ko in Kconfig help.
Changes since resend v5:
- In keembay_emmc_phy_power(), remove redundant return ret;.
Resend v5:
- Include missing changes done for phy-keembay-emmc.c (See Changes since
v3)
Changes since v4:
- In Kconfig file, add depends on ARM64 || COMPILE_TEST and
depends on OF && HAS_IOMEM.
- In Kconfig file, reword the help section to be more verbose.
Changes since v3:
- Exit keembay_emmc_phy_power() with return ret;.
- In keembay_emmc_phy_init(), use PTR_ERR_OR_ZERO(...).
- In keembay_emmc_phy_probe(), devm_regmap_init_mmio(...) in single
line.
Changes since v2:
- Modify DT example to use single cell for address and size.
Changes since v1:
- Rework phy-keembay-emmc.c to make it similar to phy-intel-emmc.c.
- Use regmap_mmio, and remove reference to intel,syscon.
- Use node name phy@....
- Update license i.e. use dual license.
Wan Ahmad Zainie (3):
phy: intel: Rename phy-intel to phy-intel-lgm
dt-bindings: phy: intel: Add Keem Bay eMMC PHY bindings
phy: intel: Add Keem Bay eMMC PHY support
.../bindings/phy/intel,keembay-emmc-phy.yaml | 44 +++
drivers/phy/intel/Kconfig | 22 +-
drivers/phy/intel/Makefile | 5 +-
drivers/phy/intel/phy-intel-keembay-emmc.c | 310 ++++++++++++++++++
...hy-intel-combo.c => phy-intel-lgm-combo.c} | 0
...{phy-intel-emmc.c => phy-intel-lgm-emmc.c} | 0
6 files changed, 374 insertions(+), 7 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/intel,keembay-emmc-phy.yaml
create mode 100644 drivers/phy/intel/phy-intel-keembay-emmc.c
rename drivers/phy/intel/{phy-intel-combo.c => phy-intel-lgm-combo.c} (100%)
rename drivers/phy/intel/{phy-intel-emmc.c => phy-intel-lgm-emmc.c} (100%)
--
2.17.1
