Convert the Renesas Pin Function Controller (PFC) Device Tree binding
documentation to json-schema.
Document missing properties.
Drop deprecated and obsolete #gpio-range-cells property.
Update the example to match reality.
Drop consumer examples, as they do not belong here.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
Notes:
- "interrupts-extended" is used explicitly, because dt-schema does not
apply the related fixup when "required: interrupts" is conditional,
- "phandle: true" is needed because dt-schema does not add it
automatically to subnodes.
To be queued in sh-pfc for v5.10.
v3:
- Enable "drive-strength" and "power-source" enum checks, now
dt-schema applies fixups correctly,
- Refer to child schema instead of duplicating everything for
grandchild nodes,
- Use "pinctrl" generic node name,
- Replace sh73a0 example by r8a7740 and r8a77951 examples,
- Add child and grandchild example nodes to exercise all schema
classes,
v2:
- Add missing "input" property for subnodes,
- Rebase on top of:
- "dt-bindings: pinctrl: sh-pfc: Document r8a7742 PFC support",
- "dt-bindings: pinctrl: sh-pfc: Document r8a774e1 PFC support",
- Describe pin configuration subnodes.
---
.../bindings/pinctrl/renesas,pfc-pinctrl.txt | 188 -----------------
.../bindings/pinctrl/renesas,pfc.yaml | 193 ++++++++++++++++++
2 files changed, 193 insertions(+), 188 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
deleted file mode 100644
index d75476e245140c4a..0000000000000000
--- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
+++ /dev/null
@@ -1,188 +0,0 @@
-* Renesas Pin Function Controller (GPIO and Pin Mux/Config)
-
-The Pin Function Controller (PFC) is a Pin Mux/Config controller. On SH73A0,
-R8A73A4 and R8A7740 it also acts as a GPIO controller.
-
-
-Pin Control
------------
-
-Required Properties:
-
- - compatible: should be one of the following.
- - "renesas,pfc-emev2": for EMEV2 (EMMA Mobile EV2) compatible pin-controller.
- - "renesas,pfc-r8a73a4": for R8A73A4 (R-Mobile APE6) compatible pin-controller.
- - "renesas,pfc-r8a7740": for R8A7740 (R-Mobile A1) compatible pin-controller.
- - "renesas,pfc-r8a7742": for R8A7742 (RZ/G1H) compatible pin-controller.
- - "renesas,pfc-r8a7743": for R8A7743 (RZ/G1M) compatible pin-controller.
- - "renesas,pfc-r8a7744": for R8A7744 (RZ/G1N) compatible pin-controller.
- - "renesas,pfc-r8a7745": for R8A7745 (RZ/G1E) compatible pin-controller.
- - "renesas,pfc-r8a77470": for R8A77470 (RZ/G1C) compatible pin-controller.
- - "renesas,pfc-r8a774a1": for R8A774A1 (RZ/G2M) compatible pin-controller.
- - "renesas,pfc-r8a774b1": for R8A774B1 (RZ/G2N) compatible pin-controller.
- - "renesas,pfc-r8a774c0": for R8A774C0 (RZ/G2E) compatible pin-controller.
- - "renesas,pfc-r8a774e1": for R8A774E1 (RZ/G2H) compatible pin-controller.
- - "renesas,pfc-r8a7778": for R8A7778 (R-Car M1) compatible pin-controller.
- - "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller.
- - "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller.
- - "renesas,pfc-r8a7791": for R8A7791 (R-Car M2-W) compatible pin-controller.
- - "renesas,pfc-r8a7792": for R8A7792 (R-Car V2H) compatible pin-controller.
- - "renesas,pfc-r8a7793": for R8A7793 (R-Car M2-N) compatible pin-controller.
- - "renesas,pfc-r8a7794": for R8A7794 (R-Car E2) compatible pin-controller.
- - "renesas,pfc-r8a7795": for R8A7795 (R-Car H3) compatible pin-controller.
- - "renesas,pfc-r8a7796": for R8A77960 (R-Car M3-W) compatible pin-controller.
- - "renesas,pfc-r8a77961": for R8A77961 (R-Car M3-W+) compatible pin-controller.
- - "renesas,pfc-r8a77965": for R8A77965 (R-Car M3-N) compatible pin-controller.
- - "renesas,pfc-r8a77970": for R8A77970 (R-Car V3M) compatible pin-controller.
- - "renesas,pfc-r8a77980": for R8A77980 (R-Car V3H) compatible pin-controller.
- - "renesas,pfc-r8a77990": for R8A77990 (R-Car E3) compatible pin-controller.
- - "renesas,pfc-r8a77995": for R8A77995 (R-Car D3) compatible pin-controller.
- - "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible pin-controller.
-
- - reg: Base address and length of each memory resource used by the pin
- controller hardware module.
-
-Optional properties:
-
- - #gpio-range-cells: Mandatory when the PFC doesn't handle GPIO, forbidden
- otherwise. Should be 3.
-
- - interrupts-extended: Specify the interrupts associated with external
- IRQ pins. This property is mandatory when the PFC handles GPIOs and
- forbidden otherwise. When specified, it must contain one interrupt per
- external IRQ, sorted by external IRQ number.
-
-The PFC node also acts as a container for pin configuration nodes. Please refer
-to pinctrl-bindings.txt in this directory for the definition of the term "pin
-configuration node" and for the common pinctrl bindings used by client devices.
-
-Each pin configuration node represents a desired configuration for a pin, a
-pin group, or a list of pins or pin groups. The configuration can include the
-function to select on those pin(s) and pin configuration parameters (such as
-pull-up and pull-down).
-
-Pin configuration nodes contain pin configuration properties, either directly
-or grouped in child subnodes. Both pin muxing and configuration parameters can
-be grouped in that way and referenced as a single pin configuration node by
-client devices.
-
-A configuration node or subnode must reference at least one pin (through the
-pins or pin groups properties) and contain at least a function or one
-configuration parameter. When the function is present only pin groups can be
-used to reference pins.
-
-All pin configuration nodes and subnodes names are ignored. All of those nodes
-are parsed through phandles and processed purely based on their content.
-
-Pin Configuration Node Properties:
-
-- pins : An array of strings, each string containing the name of a pin.
-- groups : An array of strings, each string containing the name of a pin
- group.
-
-- function: A string containing the name of the function to mux to the pin
- group(s) specified by the groups property.
-
- Valid values for pin, group and function names can be found in the group and
- function arrays of the PFC data file corresponding to the SoC
- (drivers/pinctrl/sh-pfc/pfc-*.c)
-
-The pin configuration parameters use the generic pinconf bindings defined in
-pinctrl-bindings.txt in this directory. The supported parameters are
-bias-disable, bias-pull-up, bias-pull-down, drive-strength and power-source. For
-pins that have a configurable I/O voltage, the power-source value should be the
-nominal I/O voltage in millivolts.
-
-
-GPIO
-----
-
-On SH73A0, R8A73A4 and R8A7740 the PFC node is also a GPIO controller node.
-
-Required Properties:
-
- - gpio-controller: Marks the device node as a gpio controller.
-
- - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
- cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
- GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
-
-The syntax of the gpio specifier used by client nodes should be the following
-with values derived from the SoC user manual.
-
- <[phandle of the gpio controller node]
- [pin number within the gpio controller]
- [flags]>
-
-On other mach-shmobile platforms GPIO is handled by the gpio-rcar driver.
-Please refer to Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
-for documentation of the GPIO device tree bindings on those platforms.
-
-
-Examples
---------
-
-Example 1: SH73A0 (SH-Mobile AG5) pin controller node
-
- pfc: pin-controller@e6050000 {
- compatible = "renesas,pfc-sh73a0";
- reg = <0xe6050000 0x8000>,
- <0xe605801c 0x1c>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupts-extended =
- <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
- <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
- <&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
- <&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
- <&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
- <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
- <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
- <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
- };
-
-Example 2: A GPIO LED node that references a GPIO
-
- #include <dt-bindings/gpio/gpio.h>
-
- leds {
- compatible = "gpio-leds";
- led1 {
- gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
- };
- };
-
-Example 3: KZM-A9-GT (SH-Mobile AG5) default pin state hog and pin control maps
- for the MMCIF and SCIFA4 devices
-
- &pfc {
- pinctrl-0 = <&scifa4_pins>;
- pinctrl-names = "default";
-
- mmcif_pins: mmcif {
- mux {
- groups = "mmc0_data8_0", "mmc0_ctrl_0";
- function = "mmc0";
- };
- cfg {
- groups = "mmc0_data8_0";
- pins = "PORT279";
- bias-pull-up;
- };
- };
-
- scifa4_pins: scifa4 {
- groups = "scifa4_data", "scifa4_ctrl";
- function = "scifa4";
- };
- };
-
-Example 4: KZM-A9-GT (SH-Mobile AG5) default pin state for the MMCIF device
-
- &mmcif {
- pinctrl-0 = <&mmcif_pins>;
- pinctrl-names = "default";
-
- bus-width = <8>;
- vmmc-supply = <®_1p8v>;
- };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
new file mode 100644
index 0000000000000000..4efe117550bdb21f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,pfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Pin Function Controller (GPIO and Pin Mux/Config)
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
+
+description:
+ The Pin Function Controller (PFC) is a Pin Mux/Config controller.
+ On SH/R-Mobile SoCs it also acts as a GPIO controller.
+
+properties:
+ compatible:
+ enum:
+ - renesas,pfc-emev2 # EMMA Mobile EV2
+ - renesas,pfc-r8a73a4 # R-Mobile APE6
+ - renesas,pfc-r8a7740 # R-Mobile A1
+ - renesas,pfc-r8a7742 # RZ/G1H
+ - renesas,pfc-r8a7743 # RZ/G1M
+ - renesas,pfc-r8a7744 # RZ/G1N
+ - renesas,pfc-r8a7745 # RZ/G1E
+ - renesas,pfc-r8a77470 # RZ/G1C
+ - renesas,pfc-r8a774a1 # RZ/G2M
+ - renesas,pfc-r8a774b1 # RZ/G2N
+ - renesas,pfc-r8a774c0 # RZ/G2E
+ - renesas,pfc-r8a774e1 # RZ/G2H
+ - renesas,pfc-r8a7778 # R-Car M1
+ - renesas,pfc-r8a7779 # R-Car H1
+ - renesas,pfc-r8a7790 # R-Car H2
+ - renesas,pfc-r8a7791 # R-Car M2-W
+ - renesas,pfc-r8a7792 # R-Car V2H
+ - renesas,pfc-r8a7793 # R-Car M2-N
+ - renesas,pfc-r8a7794 # R-Car E2
+ - renesas,pfc-r8a7795 # R-Car H3
+ - renesas,pfc-r8a7796 # R-Car M3-W
+ - renesas,pfc-r8a77961 # R-Car M3-W+
+ - renesas,pfc-r8a77965 # R-Car M3-N
+ - renesas,pfc-r8a77970 # R-Car V3M
+ - renesas,pfc-r8a77980 # R-Car V3H
+ - renesas,pfc-r8a77990 # R-Car E3
+ - renesas,pfc-r8a77995 # R-Car D3
+ - renesas,pfc-sh73a0 # SH-Mobile AG5
+
+ reg:
+ minItems: 1
+ maxItems: 2
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ gpio-ranges:
+ minItems: 1
+ maxItems: 16
+
+ interrupts-extended:
+ minItems: 32
+ maxItems: 64
+ description:
+ Specify the interrupts associated with external IRQ pins on SoCs where
+ the PFC acts as a GPIO controller. It must contain one interrupt per
+ external IRQ, sorted by external IRQ number.
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+if:
+ properties:
+ compatible:
+ items:
+ enum:
+ - renesas,pfc-r8a73a4
+ - renesas,pfc-r8a7740
+ - renesas,pfc-sh73a0
+then:
+ required:
+ - interrupts-extended
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+ - power-domains
+
+additionalProperties:
+ anyOf:
+ - type: object
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ description:
+ Pin controller client devices use pin configuration subnodes (children
+ and grandchildren) for desired pin configuration.
+ Client device subnodes use below standard properties.
+
+ properties:
+ phandle: true
+ function: true
+ groups: true
+ pins: true
+ bias-disable: true
+ bias-pull-down: true
+ bias-pull-up: true
+ drive-strength:
+ enum: [ 3, 6, 9, 12, 15, 18, 21, 24 ] # Superset of supported values
+ power-source:
+ enum: [ 1800, 3300 ]
+ gpio-hog: true
+ gpios: true
+ input: true
+ output-high: true
+ output-low: true
+
+ additionalProperties: false
+
+ - type: object
+ properties:
+ phandle: true
+
+ additionalProperties:
+ $ref: "#/additionalProperties/anyOf/0"
+
+examples:
+ - |
+ pfc: pinctrl@e6050000 {
+ compatible = "renesas,pfc-r8a7740";
+ reg = <0xe6050000 0x8000>,
+ <0xe605800c 0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 0 212>;
+ interrupts-extended =
+ <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
+ <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
+ <&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
+ <&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
+ <&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
+ <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
+ <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
+ <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
+ power-domains = <&pd_c5>;
+
+ lcd0_mux {
+ /* DBGMD/LCDC0/FSIA MUX */
+ gpio-hog;
+ gpios = <176 0>;
+ output-high;
+ };
+ };
+
+ - |
+ pinctrl@e6060000 {
+ compatible = "renesas,pfc-r8a7795";
+ reg = <0xe6060000 0x50c>;
+
+ avb_pins: avb {
+ mux {
+ groups = "avb_link", "avb_mdio", "avb_mii";
+ function = "avb";
+ };
+
+ pins_mdio {
+ groups = "avb_mdio";
+ drive-strength = <24>;
+ };
+
+ pins_mii_tx {
+ pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC",
+ "PIN_AVB_TD0", "PIN_AVB_TD1", "PIN_AVB_TD2",
+ "PIN_AVB_TD3";
+ drive-strength = <12>;
+ };
+ };
+
+ keys_pins: keys {
+ pins = "GP_5_17", "GP_5_20", "GP_5_22", "GP_2_1";
+ bias-pull-up;
+ };
+
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+ };
--
2.17.1
