[PATCH] dt-bindings: net: correct description of phy-connection-type

Madalin Bucur <madalin.bucur@xxxxxxxxxxx> · Thu, 20 Aug 2020 13:02:04 +0300

The phy-connection-type parameter is described in ePAPR 1.1:

Specifies interface type between the Ethernet device and a physical
layer (PHY) device. The value of this property is specific to the
implementation.

Signed-off-by: Madalin Bucur <madalin.bucur@xxxxxxxxxxx>
---
 Documentation/devicetree/bindings/net/ethernet-controller.yaml | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index 1c4474036d46..fa2baca8c726 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -54,7 +54,8 @@ properties:
 
   phy-connection-type:
     description:
-      Operation mode of the PHY interface
+      Specifies interface type between the Ethernet device and a physical
+      layer (PHY) device.
     enum:
       # There is not a standard bus between the MAC and the PHY,
       # something proprietary is being used to embed the PHY in the
-- 
2.1.0







