- Remove pinctrl consumer properties, as they are handled by core dt-schema, - Document missing properties, - Document missing PHY child node, - Add "additionalProperties: false". Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> --- v2: - Add Reviewed-by. --- .../bindings/net/renesas,ether.yaml | 22 +++++++++++++------ 1 file changed, 15 insertions(+), 7 deletions(-) diff --git a/Documentation/devicetree/bindings/net/renesas,ether.yaml b/Documentation/devicetree/bindings/net/renesas,ether.yaml index 08678af5ed9364cd..8ce5ed8a58dd76e6 100644 --- a/Documentation/devicetree/bindings/net/renesas,ether.yaml +++ b/Documentation/devicetree/bindings/net/renesas,ether.yaml @@ -59,9 +59,15 @@ properties: clocks: maxItems: 1 - pinctrl-0: true + power-domains: + maxItems: 1 + + resets: + maxItems: 1 - pinctrl-names: true + phy-mode: true + + phy-handle: true renesas,no-ether-link: type: boolean @@ -74,6 +80,11 @@ properties: specify when the Ether LINK signal is active-low instead of normal active-high +patternProperties: + "^ethernet-phy@[0-9a-f]$": + type: object + $ref: ethernet-phy.yaml# + required: - compatible - reg @@ -83,7 +94,8 @@ required: - '#address-cells' - '#size-cells' - clocks - - pinctrl-0 + +additionalProperties: false examples: # Lager board @@ -99,8 +111,6 @@ examples: clocks = <&mstp8_clks R8A7790_CLK_ETHER>; phy-mode = "rmii"; phy-handle = <&phy1>; - pinctrl-0 = <ðer_pins>; - pinctrl-names = "default"; renesas,ether-link-active-low; #address-cells = <1>; #size-cells = <0>; @@ -109,7 +119,5 @@ examples: reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - pinctrl-0 = <&phy1_pins>; - pinctrl-names = "default"; }; }; -- 2.17.1