This adds support for the Innolux LS075AT011 7.5" 1200x900 panel. There's
no public data sheet for the panel -- the values have been taken from Open
Firmware and the documentation for the display controller that drives
the panel and tested on the OLPC laptop.
Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
---
drivers/gpu/drm/panel/panel-simple.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index cb6550d37e858..dfc69457ed2d4 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2121,6 +2121,30 @@ static const struct panel_desc innolux_g121x1_l03 = {
},
};
+static const struct display_timing innolux_ls075at011_timing = {
+ .pixelclock = { 56000000, 57000000, 58000000 },
+ .hactive = { 1200, 1200, 1200 },
+ .hfront_porch = { 26, 26, 26 },
+ .hback_porch = { 24, 24, 24 },
+ .hsync_len = { 6, 6, 6 },
+ .vactive = { 900, 900, 900 },
+ .vfront_porch = { 4, 4, 4 },
+ .vback_porch = { 5, 5, 5 },
+ .vsync_len = { 3, 3, 3 },
+ .flags = DISPLAY_FLAGS_VSYNC_LOW | DISPLAY_FLAGS_HSYNC_LOW,
+};
+
+static const struct panel_desc innolux_ls075at011 = {
+ .timings = &innolux_ls075at011_timing,
+ .num_timings = 1,
+ .bpc = 8,
+ .size = {
+ .width = 152,
+ .height = 115,
+ },
+ .connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
/*
* Datasheet specifies that at 60 Hz refresh rate:
* - total horizontal time: { 1506, 1592, 1716 }
@@ -3907,6 +3931,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "innolux,g121x1-l03",
.data = &innolux_g121x1_l03,
+ }, {
+ .compatible = "innolux,ls075at011",
+ .data = &innolux_ls075at011,
}, {
.compatible = "innolux,n116bge",
.data = &innolux_n116bge,
--
2.26.2
