On Mon, 17 Aug 2020 14:17:22 -0500, Ricardo Rivera-Matos wrote: > Add the bindings for the bq256xx series of battery charging ICs. > > Datasheets: > - https://www.ti.com/lit/ds/symlink/bq25600.pdf > - https://www.ti.com/lit/ds/symlink/bq25601.pdf > - https://www.ti.com/lit/ds/symlink/bq25600d.pdf > - https://www.ti.com/lit/ds/symlink/bq25601d.pdf > - https://www.ti.com/lit/ds/symlink/bq25611d.pdf > - https://www.ti.com/lit/ds/symlink/bq25618.pdf > - https://www.ti.com/lit/ds/symlink/bq25619.pdf > > Signed-off-by: Ricardo Rivera-Matos <r-rivera-matos@xxxxxx> > --- > .../bindings/power/supply/bq256xx.yaml | 99 +++++++++++++++++++ > 1 file changed, 99 insertions(+) > create mode 100644 Documentation/devicetree/bindings/power/supply/bq256xx.yaml > My bot found errors running 'make dt_binding_check' on your patch: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/power/supply/bq256xx.example.dt.yaml: battery: 'termination-current-microamp' does not match any of the regexes: '^ocv-capacity-table-[0-9]+$', 'pinctrl-[0-9]+' See https://patchwork.ozlabs.org/patch/1346479 If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade Please check and re-submit.
