Re: [PATCH] dt-bindings: sound: Convert NXP spdif to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 06, 2020 at 01:17:57PM +0800, Anson Huang wrote:
> Convert the NXP SPDIF binding to DT schema format using json-schema.
> 
> Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> ---
>  .../devicetree/bindings/sound/fsl,spdif.txt        |  68 -------------
>  .../devicetree/bindings/sound/fsl,spdif.yaml       | 108 +++++++++++++++++++++
>  2 files changed, 108 insertions(+), 68 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/sound/fsl,spdif.txt
>  create mode 100644 Documentation/devicetree/bindings/sound/fsl,spdif.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
> deleted file mode 100644
> index e1365b0..0000000
> --- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt
> +++ /dev/null
> @@ -1,68 +0,0 @@
> -Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller
> -
> -The Freescale S/PDIF audio block is a stereo transceiver that allows the
> -processor to receive and transmit digital audio via an coaxial cable or
> -a fibre cable.
> -
> -Required properties:
> -
> -  - compatible		: Compatible list, should contain one of the following
> -			  compatibles:
> -			  "fsl,imx35-spdif",
> -			  "fsl,vf610-spdif",
> -			  "fsl,imx6sx-spdif",
> -
> -  - reg			: Offset and length of the register set for the device.
> -
> -  - interrupts		: Contains the spdif interrupt.
> -
> -  - dmas		: Generic dma devicetree binding as described in
> -			  Documentation/devicetree/bindings/dma/dma.txt.
> -
> -  - dma-names		: Two dmas have to be defined, "tx" and "rx".
> -
> -  - clocks		: Contains an entry for each entry in clock-names.
> -
> -  - clock-names		: Includes the following entries:
> -	"core"		  The core clock of spdif controller.
> -	"rxtx<0-7>"	  Clock source list for tx and rx clock.
> -			  This clock list should be identical to the source
> -			  list connecting to the spdif clock mux in "SPDIF
> -			  Transceiver Clock Diagram" of SoC reference manual.
> -			  It can also be referred to TxClk_Source bit of
> -			  register SPDIF_STC.
> -	"spba"		  The spba clock is required when SPDIF is placed as a
> -			  bus slave of the Shared Peripheral Bus and when two
> -			  or more bus masters (CPU, DMA or DSP) try to access
> -			  it. This property is optional depending on the SoC
> -			  design.
> -
> -Optional properties:
> -
> -   - big-endian		: If this property is absent, the native endian mode
> -			  will be in use as default, or the big endian mode
> -			  will be in use for all the device registers.
> -
> -Example:
> -
> -spdif: spdif@2004000 {
> -	compatible = "fsl,imx35-spdif";
> -	reg = <0x02004000 0x4000>;
> -	interrupts = <0 52 0x04>;
> -	dmas = <&sdma 14 18 0>,
> -	       <&sdma 15 18 0>;
> -	dma-names = "rx", "tx";
> -
> -	clocks = <&clks 197>, <&clks 3>,
> -	       <&clks 197>, <&clks 107>,
> -	       <&clks 0>, <&clks 118>,
> -	       <&clks 62>, <&clks 139>,
> -	       <&clks 0>;
> -	clock-names = "core", "rxtx0",
> -		"rxtx1", "rxtx2",
> -		"rxtx3", "rxtx4",
> -		"rxtx5", "rxtx6",
> -		"rxtx7";
> -
> -	big-endian;
> -};
> diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml
> new file mode 100644
> index 0000000..819f37f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml
> @@ -0,0 +1,108 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/fsl,spdif.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller
> +
> +maintainers:
> +  - Shengjiu Wang <shengjiu.wang@xxxxxxx>
> +
> +description: |
> +  The Freescale S/PDIF audio block is a stereo transceiver that allows the
> +  processor to receive and transmit digital audio via an coaxial cable or
> +  a fibre cable.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - fsl,imx35-spdif
> +      - fsl,vf610-spdif
> +      - fsl,imx6sx-spdif
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  dmas:
> +    items:
> +      - description: DMA controller phandle and request line for RX
> +      - description: DMA controller phandle and request line for TX
> +
> +  dma-names:
> +    items:
> +      - const: rx
> +      - const: tx
> +
> +  clocks:
> +    items:
> +      - description: The core clock of spdif controller.
> +      - description: Clock for tx0 and rx0.
> +      - description: Clock for tx1 and rx1.
> +      - description: Clock for tx2 and rx2.
> +      - description: Clock for tx3 and rx3.
> +      - description: Clock for tx4 and rx4.
> +      - description: Clock for tx5 and rx5.
> +      - description: Clock for tx6 and rx6.
> +      - description: Clock for tx7 and rx7.
> +      - description: The spba clock is required when SPDIF is placed as a bus
> +          slave of the Shared Peripheral Bus and when two or more bus masters
> +          (CPU, DMA or DSP) try to access it. This property is optional depending
> +          on the SoC design.
> +    minItems: 9
> +
> +  clock-names:
> +    items:
> +      - const: core
> +      - const: rxtx0
> +      - const: rxtx1
> +      - const: rxtx2
> +      - const: rxtx3
> +      - const: rxtx4
> +      - const: rxtx5
> +      - const: rxtx6
> +      - const: rxtx7
> +      - const: spba
> +    minItems: 9
> +
> +  big-endian:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: |
> +      If this property is absent, the native endian mode will be in use
> +      as default, or the big endian mode will be in use for all the device
> +      registers. Set this flag for HCDs with big endian descriptors and big
> +      endian registers.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - dmas
> +  - dma-names
> +  - clocks
> +  - clock-names

Add:

additionalProperties: false

With that added,

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>

> +
> +examples:
> +  - |
> +    spdif@2004000 {
> +        compatible = "fsl,imx35-spdif";
> +        reg = <0x02004000 0x4000>;
> +        interrupts = <0 52 0x04>;
> +        dmas = <&sdma 14 18 0>,
> +               <&sdma 15 18 0>;
> +        dma-names = "rx", "tx";
> +        clocks = <&clks 197>, <&clks 3>,
> +                 <&clks 197>, <&clks 107>,
> +                 <&clks 0>, <&clks 118>,
> +                 <&clks 62>, <&clks 139>,
> +                 <&clks 0>;
> +        clock-names = "core", "rxtx0",
> +                      "rxtx1", "rxtx2",
> +                      "rxtx3", "rxtx4",
> +                      "rxtx5", "rxtx6",
> +                      "rxtx7";
> +        big-endian;
> +    };
> -- 
> 2.7.4
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux