[PATCH] dt-bindings: media: imx274: Convert to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Slightly better with a subject  =)

I made a formatting error, empty line between receivers list and Subject:

Sorry about this :)

On Mon, Aug 17, 2020 at 06:00:37PM +0200, Jacopo Mondi wrote:
> Subject: [PATCH] dt-bindings: media: imx274: Convert to json-schema
>
> Convert the imx274 bindings document to json-schema and update
> the MAINTAINERS file accordingly.
>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> ---
>  .../bindings/media/i2c/sony,imx214.txt        |  53 --------
>  .../bindings/media/i2c/sony,imx214.yaml       | 124 ++++++++++++++++++
>  MAINTAINERS                                   |   2 +-
>  3 files changed, 125 insertions(+), 54 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt b/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
> deleted file mode 100644
> index f11f28a5fda4..000000000000
> --- a/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
> +++ /dev/null
> @@ -1,53 +0,0 @@
> -* Sony 1/3.06-Inch 13.13Mp CMOS Digital Image Sensor
> -
> -The Sony imx214 is a 1/3.06-inch CMOS active pixel digital image sensor with
> -an active array size of 4224H x 3200V. It is programmable through an I2C
> -interface.
> -Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a maximum
> -throughput of 1.2Gbps/lane.
> -
> -
> -Required Properties:
> -- compatible: Shall be "sony,imx214".
> -- reg: I2C bus address of the device. Depending on how the sensor is wired,
> -       it shall be <0x10> or <0x1a>;
> -- enable-gpios: GPIO descriptor for the enable pin.
> -- vdddo-supply: Chip digital IO regulator (1.8V).
> -- vdda-supply: Chip analog regulator (2.7V).
> -- vddd-supply: Chip digital core regulator (1.12V).
> -- clocks: Reference to the xclk clock.
> -- clock-frequency: Frequency of the xclk clock.
> -
> -Optional Properties:
> -- flash-leds: See ../video-interfaces.txt
> -- lens-focus: See ../video-interfaces.txt
> -
> -The imx214 device node shall contain one 'port' child node with
> -an 'endpoint' subnode. For further reading on port node refer to
> -Documentation/devicetree/bindings/media/video-interfaces.txt.
> -
> -Required Properties on endpoint:
> -- data-lanes: check ../video-interfaces.txt
> -- link-frequencies: check ../video-interfaces.txt
> -- remote-endpoint: check ../video-interfaces.txt
> -
> -Example:
> -
> -	camera-sensor@1a {
> -		compatible = "sony,imx214";
> -		reg = <0x1a>;
> -		vdddo-supply = <&pm8994_lvs1>;
> -		vddd-supply = <&camera_vddd_1v12>;
> -		vdda-supply = <&pm8994_l17>;
> -		lens-focus = <&ad5820>;
> -		enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
> -		clocks = <&mmcc CAMSS_MCLK0_CLK>;
> -		clock-frequency = <24000000>;
> -		port {
> -			imx214_ep: endpoint {
> -				data-lanes = <1 2 3 4>;
> -				link-frequencies = /bits/ 64 <480000000>;
> -				remote-endpoint = <&csiphy0_ep>;
> -			};
> -		};
> -	};
> diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
> new file mode 100644
> index 000000000000..ddd4627214b1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
> @@ -0,0 +1,124 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/sony,imx214.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sony 1/3.06-Inch 13.13Mp CMOS Digital Image Sensor
> +
> +maintainers:
> +  - Ricardo Ribalda <ribalda@xxxxxxxxxx>
> +
> +description: -|
> +  The Sony imx214 is a 1/3.06-inch CMOS active pixel digital image sensor with
> +  an active array size of 4224H x 3200V. It is programmable through an I2C
> +  interface.  Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a
> +  maximum throughput of 1.2Gbps/lane.
> +
> +properties:
> +  compatible:
> +    const: sony,imx214
> +
> +  reg:
> +    description: -|
> +      I2C device address. Depends on how the sensor is wired, it shall be
> +    enum:
> +      - 0x10
> +      - 0x1a
> +
> +  clocks:
> +    description: Reference to the xclk clock.
> +    maxItems: 1
> +
> +  clock-frequency:
> +    description: Frequency of the xclk clock in Hz.
> +
> +  enable-gpios:
> +    description: GPIO descriptor for the enable pin.
> +    maxItems: 1
> +
> +  vdddo-supply:
> +    description: Chip digital IO regulator (1.8V).
> +    maxItems: 1
> +
> +  vdda-supply:
> +    description: Chip analog regulator (2.7V).
> +    maxItems: 1
> +
> +  vddd-supply:
> +    description: Chip digital core regulator (1.12V).
> +    maxItems: 1
> +
> +  flash-leds:
> +    description: See ../video-interfaces.txt
> +
> +  lens-focus:
> +    description: See ../video-interfaces.txt
> +
> +  port:
> +    type: object
> +    description: |
> +      The device node must contain one 'port' child node for its digital output
> +      video port, in accordance with the video interface bindings defined in
> +      Documentation/devicetree/bindings/media/video-interfaces.txt.
> +
> +    properties:
> +      endpoint:
> +        type: object
> +        properties:
> +          remote-endpoint:
> +            description: See ../video-interfaces.txt
> +
> +          data-lanes:
> +            description: See ../video-interfaces.txt
> +
> +          link-frequencies:
> +            description: See ../video-interfaces.txt
> +
> +        required:
> +          - data-lanes
> +          - link-frequencies
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-frequency
> +  - enable-gpios
> +  - vdddo-supply
> +  - vdda-supply
> +  - vddd-supply
> +  - port
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c0 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        camera-sensor@1a {
> +            compatible = "sony,imx214";
> +            reg = <0x1a>;
> +            vdddo-supply = <&pm8994_lvs1>;
> +            vddd-supply = <&camera_vddd_1v12>;
> +            vdda-supply = <&pm8994_l17>;
> +            lens-focus = <&ad5820>;
> +            enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
> +            clocks = <&camera_clk>;
> +            clock-frequency = <24000000>;
> +
> +            port {
> +                imx214_ep: endpoint {
> +                    data-lanes = <1 2 3 4>;
> +                    link-frequencies = /bits/ 64 <480000000>;
> +                    remote-endpoint = <&csiphy0_ep>;
> +                };
> +            };
> +        };
> +    };
> +
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 6c8e98238a7b..d1a6173d3b64 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -15918,7 +15918,7 @@ M:	Ricardo Ribalda <ribalda@xxxxxxxxxx>
>  L:	linux-media@xxxxxxxxxxxxxxx
>  S:	Maintained
>  T:	git git://linuxtv.org/media_tree.git
> -F:	Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
> +F:	Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
>  F:	drivers/media/i2c/imx214.c
>
>  SONY IMX219 SENSOR DRIVER
> --
> 2.27.0
>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux