Hi Sam, On Sat, Aug 15, 2020 at 10:39:17AM +0200, Sam Ravnborg wrote: > Hi Guido. > > On Fri, Aug 14, 2020 at 03:36:22PM +0200, Guido Günther wrote: > > The panel uses a Focaltech FT8006p, the touch part is handled by the > > already existing edt-ft5x06. > > > > Signed-off-by: Guido Günther <agx@xxxxxxxxxxx> > > A few trivialities. Thanks for having a look. One remark inline: > > > --- > > .../display/panel/mantix,mlaf057we51-x.yaml | 73 +++++++++++++++++++ > > 1 file changed, 73 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml > > > > diff --git a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml > > new file mode 100644 > > index 0000000000000..349f3380ac940 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml > > @@ -0,0 +1,73 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/display/panel/mantix,mlaf057we51-x.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Mantix MLAF057WE51-X 5.7" 720x1440 TFT LCD panel > > + > > +maintainers: > > + - Guido Günther <agx@xxxxxxxxxxx> > > + > > +description: | > > + Mantix MLAF057WE51 X is a 720x1440 TFT LCD panel > > + connected using a MIPI-DSI video interface. > Indent text with two spaces only. > And I have learned that '|' is only needed to preserve formatting - so > it can be dropped. > > > + > > +allOf: > > + - $ref: panel-common.yaml# > > + > > +properties: > > + compatible: > > + enum: > > + - mantix,mlaf057we51-x > This is a list - so needs an extra 2 spaces indent. > See https://lore.kernel.org/linux-devicetree/f1963eb9-283f-e903-2a3a-4f324d71d418@xxxxxxxxxxxxxxxx/T/#m65900317fb948f6c40e8fb521f2201fba3c301a7 > for examples where Rob fixes this. Doesn't this only apply if the 'outer element' is a list too so e.g.: - enum - foo trips up yamllint but enum - foo doesn't. Since yamllint was happy i kept it as is (looking at your reference suggests that too). All the rest made sense and i fixed that for the upcoming v2. Thanks for having a look! -- Guido > > > + > > + port: true > > + reg: > > + maxItems: 1 > > + description: DSI virtual channel > > + > > + avdd-supply: > > + description: Positive analog power supply > > + > > + avee-supply: > > + description: Negative analog power supply > > + > > + vddi-supply: > > + description: 1.8V I/O voltage supply > > + > > + reset-gpios: > > + description: GPIO used for the reset pin > > + maxItems: 1 > Use reset-gpios: true as we already have it in panel-common.yaml > > > + > > + backlight: > > + description: Backlight used by the panel > > + $ref: "/schemas/types.yaml#/definitions/phandle" > Use backlight from panel-common.yaml. > > > + > > +required: > > + - compatible > > + - reg > > + - avdd-supply > > + - avee-supply > > + - vddi-supply > > + - reset-gpios > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/gpio/gpio.h> > > + > > + dsi { > My personal preference is indent with 4 spaces in examples but there are > no rules so feel free to ignore. > > + #address-cells = <1>; > > + #size-cells = <0>; > > + panel@0 { > > + compatible = "mantix,mlaf057we51-x"; > > + reg = <0>; > > + avdd-supply = <®_avdd>; > > + avee-supply = <®_avee>; > > + vddi-supply = <®_1v8_p>; > > + reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; > > + backlight = <&backlight>; > > + }; > > + }; > I think we need an ampty line here. > > +... > > -- > > 2.26.2 > > > > _______________________________________________ > > dri-devel mailing list > > dri-devel@xxxxxxxxxxxxxxxxxxxxx > > https://lists.freedesktop.org/mailman/listinfo/dri-devel >