Re: [PATCH] regulator: Add support for RT4801 Display Bias regulator driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 14 Aug 2020 13:59:33 +0800, cy_huang wrote:
> From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
> 
> Adds support for the RT4801 DSV. It has two regulators (DSVP/DSVN) with an I2C
> interface. DSVP/DSVN can provide the display panel module for the positive/negative
> voltage range from (+/-)4V to (+/-)6V.
> ---
>  .../regulator/richtek,rt4801-regulator.yaml        |  80 ++++++++
>  drivers/regulator/Kconfig                          |   7 +
>  drivers/regulator/Makefile                         |   1 +
>  drivers/regulator/rt4801-regulator.c               | 223 +++++++++++++++++++++
>  4 files changed, 311 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml
>  create mode 100644 drivers/regulator/rt4801-regulator.c
> 


My bot found errors running 'make dt_binding_check' on your patch:

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml: additionalProperties: ['enable-gpios'] is not of type 'object', 'boolean'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml: additionalProperties: ['enable-gpios'] is not valid under any of the given schemas (Possible causes of the failure):
	/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml: additionalProperties: ['enable-gpios'] is not of type 'object'

make[1]: *** [Documentation/devicetree/bindings/Makefile:19: Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml: ignoring, error in schema: additionalProperties
warning: no schema found in file: ./Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml
make: *** [Makefile:1334: dt_binding_check] Error 2


See https://patchwork.ozlabs.org/patch/1344633

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux