Another wack-a-mole pass of killing off unnecessary 'allOf + $ref'
usage.
json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords. The json-schema library doesn't yet support this, but the
tooling now does a fixup for this and either way works.
This has been a constant source of review comments, so let's change this
treewide so everyone copies the simpler syntax.
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
.../bindings/display/brcm,bcm2835-hdmi.yaml | 3 +-
.../bindings/iio/adc/qcom,spmi-vadc.yaml | 3 +-
.../interrupt-controller/mti,gic.yaml | 28 ++++++------
.../bindings/media/i2c/dongwoon,dw9768.yaml | 43 +++++++++----------
.../bindings/pci/ti,j721e-pci-ep.yaml | 3 +-
.../bindings/pci/ti,j721e-pci-host.yaml | 3 +-
.../bindings/sound/maxim,max98390.yaml | 6 +--
.../bindings/sound/nvidia,tegra186-dspk.yaml | 3 +-
.../bindings/sound/nvidia,tegra210-dmic.yaml | 3 +-
.../bindings/sound/nvidia,tegra210-i2s.yaml | 3 +-
.../bindings/sound/ti,j721e-cpb-audio.yaml | 6 +--
.../sound/ti,j721e-cpb-ivi-audio.yaml | 15 +++----
12 files changed, 49 insertions(+), 70 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml
index 52b3cdac0bdf..f54b4e4808f0 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml
@@ -32,8 +32,7 @@ properties:
- const: hdmi
ddc:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description: >
Phandle of the I2C controller used for DDC EDID probing
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
index a6ac289d98da..0ca992465a21 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
@@ -97,8 +97,7 @@ patternProperties:
input signal is multiplied. For example, <1 3> indicates the signal is scaled
down to 1/3 of its value before ADC measurement.
If property is not found default value depending on chip will be used.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
oneOf:
- items:
- const: 1
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml
index 9f0eb3addac4..ce6aaff15214 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml
@@ -42,14 +42,13 @@ properties:
Specifies the list of CPU interrupt vectors to which the GIC may not
route interrupts. This property is ignored if the CPU is started in EIC
mode.
- allOf:
- - $ref: /schemas/types.yaml#definitions/uint32-array
- - minItems: 1
- maxItems: 6
- uniqueItems: true
- items:
- minimum: 2
- maximum: 7
+ $ref: /schemas/types.yaml#definitions/uint32-array
+ minItems: 1
+ maxItems: 6
+ uniqueItems: true
+ items:
+ minimum: 2
+ maximum: 7
mti,reserved-ipi-vectors:
description: |
@@ -57,13 +56,12 @@ properties:
It accepts two values: the 1st is the starting interrupt and the 2nd is
the size of the reserved range. If not specified, the driver will
allocate the last (2 * number of VPEs in the system).
- allOf:
- - $ref: /schemas/types.yaml#definitions/uint32-array
- - items:
- - minimum: 0
- maximum: 254
- - minimum: 2
- maximum: 254
+ $ref: /schemas/types.yaml#definitions/uint32-array
+ items:
+ - minimum: 0
+ maximum: 254
+ - minimum: 2
+ maximum: 254
timer:
type: object
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml
index cb96e95d7e81..21864ab86ec4 100644
--- a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml
@@ -38,39 +38,36 @@ properties:
dongwoon,aac-mode:
description:
Indication of AAC mode select.
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - enum:
- - 1 # AAC2 mode(operation time# 0.48 x Tvib)
- - 2 # AAC3 mode(operation time# 0.70 x Tvib)
- - 3 # AAC4 mode(operation time# 0.75 x Tvib)
- - 5 # AAC8 mode(operation time# 1.13 x Tvib)
- default: 2
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ enum:
+ - 1 # AAC2 mode(operation time# 0.48 x Tvib)
+ - 2 # AAC3 mode(operation time# 0.70 x Tvib)
+ - 3 # AAC4 mode(operation time# 0.75 x Tvib)
+ - 5 # AAC8 mode(operation time# 1.13 x Tvib)
+ default: 2
dongwoon,aac-timing:
description:
Number of AAC Timing count that controlled by one 6-bit period of
vibration register AACT[5:0], the unit of which is 100 us.
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - default: 0x20
- minimum: 0x00
- maximum: 0x3f
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ default: 0x20
+ minimum: 0x00
+ maximum: 0x3f
dongwoon,clock-presc:
description:
Indication of VCM internal clock dividing rate select, as one multiple
factor to calculate VCM ring periodic time Tvib.
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - enum:
- - 0 # Dividing Rate - 2
- - 1 # Dividing Rate - 1
- - 2 # Dividing Rate - 1/2
- - 3 # Dividing Rate - 1/4
- - 4 # Dividing Rate - 8
- - 5 # Dividing Rate - 4
- default: 1
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ enum:
+ - 0 # Dividing Rate - 2
+ - 1 # Dividing Rate - 1
+ - 2 # Dividing Rate - 1/2
+ - 3 # Dividing Rate - 1/4
+ - 4 # Dividing Rate - 8
+ - 5 # Dividing Rate - 4
+ default: 1
required:
- compatible
diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
index cfe25cface21..b3c3d0c3c390 100644
--- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
@@ -31,8 +31,7 @@ properties:
ti,syscon-pcie-ctrl:
description: Phandle to the SYSCON entry required for configuring PCIe mode
and link speed.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
power-domains:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
index d7b60487c6c3..8200ba00bc09 100644
--- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
@@ -31,8 +31,7 @@ properties:
ti,syscon-pcie-ctrl:
description: Phandle to the SYSCON entry required for configuring PCIe mode
and link speed.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
power-domains:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/sound/maxim,max98390.yaml b/Documentation/devicetree/bindings/sound/maxim,max98390.yaml
index 9c2e3effa0c0..fea9a1b6619a 100644
--- a/Documentation/devicetree/bindings/sound/maxim,max98390.yaml
+++ b/Documentation/devicetree/bindings/sound/maxim,max98390.yaml
@@ -18,16 +18,14 @@ properties:
description: I2C address of the device.
maxim,temperature_calib:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
description: The calculated temperature data was measured while doing the calibration.
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 65535
maxim,r0_calib:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
description: This is r0 calibration data which was measured in factory mode.
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 8388607
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml
index e620c77d0728..2f2fcffa65cb 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml
@@ -48,8 +48,7 @@ properties:
sound-name-prefix:
pattern: "^DSPK[1-9]$"
- allOf:
- - $ref: /schemas/types.yaml#/definitions/string
+ $ref: /schemas/types.yaml#/definitions/string
description:
Used as prefix for sink/source names of the component. Must be a
unique string among multiple instances of the same component.
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml
index 1c14e83f67c7..8689d9f18c11 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml
@@ -49,8 +49,7 @@ properties:
sound-name-prefix:
pattern: "^DMIC[1-9]$"
- allOf:
- - $ref: /schemas/types.yaml#/definitions/string
+ $ref: /schemas/types.yaml#/definitions/string
description:
used as prefix for sink/source names of the component. Must be a
unique string among multiple instances of the same component.
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml
index 795797001843..9bbf18153d63 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml
@@ -67,8 +67,7 @@ properties:
sound-name-prefix:
pattern: "^I2S[1-9]$"
- allOf:
- - $ref: /schemas/types.yaml#/definitions/string
+ $ref: /schemas/types.yaml#/definitions/string
description:
Used as prefix for sink/source names of the component. Must be a
unique string among multiple instances of the same component.
diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
index 6f2be6503401..d52cfbeb2d07 100644
--- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
@@ -37,13 +37,11 @@ properties:
ti,cpb-mcasp:
description: phandle to McASP used on CPB
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
ti,cpb-codec:
description: phandle to the pcm3168a codec used on the CPB
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
clocks:
items:
diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
index e0b88470a502..bb780f621628 100644
--- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
@@ -50,28 +50,23 @@ properties:
ti,cpb-mcasp:
description: phandle to McASP used on CPB
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
ti,cpb-codec:
description: phandle to the pcm3168a codec used on the CPB
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
ti,ivi-mcasp:
description: phandle to McASP used on IVI
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
ti,ivi-codec-a:
description: phandle to the pcm3168a-A codec on the expansion board
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
ti,ivi-codec-b:
description: phandle to the pcm3168a-B codec on the expansion board
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
clocks:
items:
--
2.25.1
